This all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.

Instantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely. The Cerbo GX turns any power challenge into an effortless experience.

The Cerbo GX maximises the performance of your systems components in real-time and keeps them in perfect tune. With its Dual Core Processor and the addition of an extra CAN-bus port you can now support even bigger systems; closely follow managed (lithium) batteries while the second port can support up to 25 simultaneously connected VE.Can solar chargers. The new NMEA 2000-out support has the GX easily integrated into any boats network. Four tank- and four temperature ports as well as 3 VE.Direct ports, 3 USB ports, 4 digital inputs and 2 relays allow you to expand control to a new level. Maximising systems performance was never this easy.

The new (optional) GX Touch display allows you to have an instant overview of your system and adjust settings in the blink of an eye. Its super slim 5 or 7 inch waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.

The Cerbo GX is now optimised to more than meet the standards of installer professionals. The device is easily mountable on a DIN-Rail and its separate touchscreen can now be bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. Its new Bluetooth feature enables a quick connection and configuration via our VictronConnect app.

The Cerbo GX serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as Marine, or Off-grid & Backup, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess (solar) power to self-consumption, saving you money. For RV and Emergency vehicles it keeps vital systems function flawlessly. But that’s just to name a few…

Brand	Victron Energy
Manufacturer Part Number	BPP900450120
gtin	8719076058847
Dimensions	H78 x W154 x D48mm
Warranty	5 Years
Country of Manufacture	Malaysia

Victron Energy Charger Switch (Skylla-TG) â€“ SDRPCSV-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Charger Switch (Skylla-TG) â€“ SDRPCSV

£104.46 INC. VAT
(£87.05 EXC. VAT)

A remote on-off switch for the Skylla-TG Charger.

Brand	Victron Energy
Manufacturer Part Number	SDRPCSV
Frequency (Hz)	50/60
Dimensions	L65 x W60 x D40mm
Warranty	5 Years

Victron Energy Clamp connector (with 30A ATO fuse) â€“ BPC900400014

£9.89 INC. VAT
(£8.24 EXC. VAT)

The clamp connector with fuse is an accessory for the Blue Power IP65 Chargers and the Blue Smart IP65 Chargers.

Brand	Victron Energy
Manufacturer Part Number	BPC900400014
Warranty	5 Years

Victron Energy Color Control GX â€“ BPP010300100R-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Color Control GX â€“ BPP010300100R

£356.16 INC. VAT
(£296.80 EXC. VAT)

Â The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained â€“ almost anywhere in the world â€“ by accessing your Color Control GX using our free-to-use Victron Remote Management Portal

Intuitive system overview â€“ all you need to know

At a single touch, Color Control GX provides an instant overview of your system: battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator.

The full power of Victron Remote Management

Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to either your CCGX orÂ Venus GX. It allows remote user and installer login â€“ from anywhere, at anytime. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information.

Automatic Generator start/stop

The Color Control GX can be programmed to auto-start your generator â€“ triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of â€˜quietâ€™ periods â€“ avoiding accidental nuisance at dead of night.

Remote Console â€“ control everything from anywhereâ€¦

A Remote Console feature is available. Itâ€™s like carrying the front face of your CCGX control panel around on your phone, or other device.Â

Energy Storage Systems â€“ 24 hour Monitoring

The Color Control GX manages Energy Storage Systems. It keeps back-up batteries at 100% ; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption â€“ saving you money. For examples and more detailed information see theÂ ESS (Energy Storage System) manual.

Remotely monitor your boat or motorhome electrics

Planning a trip? Remote monitoring of your Color Control GX allows you to make sure your boat or motorhome are ready to go. Color Control GX also allows you to talk to connected equipment from other manufacturers.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	BPP010300100R
Power Supply Voltage Range	8-70 V DC
Dimensions	H130 x W120 x D28mm
Weight (kg)	0.3
Warranty	5 Years

Victron Energy Current Transformer 100A:50mA for MultiPlus-II (5m) â€“ CTR110000550-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Current Transformer 100A:50mA for MultiPlus-II (5m) â€“ CTR110000550

£33.80 INC. VAT
(£28.17 EXC. VAT)

Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. Maximum current: 32A.

Brand	Victron Energy
Manufacturer Part Number	CTR110000500
Weight (kg)	0.06
Warranty	5 Years

Victron Energy Current Transformer 100A:50mA for MultiPlus-II â€“ CTR110000500-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Current Transformer 100A:50mA for MultiPlus-II â€“ CTR110000500

£30.49 INC. VAT
(£25.41 EXC. VAT)

Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. Maximum current: 32A.

Brand	Victron Energy
Manufacturer Part Number	CTR110000500
Weight (kg)	0.06
Warranty	5 Years

Victron Energy Cyrix-ct 12/24V 120A Battery Combiner Kit â€“ CYR010120110R

£88.88 INC. VAT
(£74.07 EXC. VAT)

This Battery Combiner Kit is for adding a 2nd or 3rd battery system in your car, boat, RV or whatever you wish. It utilizes the simplest and most advanced technology to keep all your batteries charged using the engines electrical system, but isolates the starting battery when charging ceases so you never get stranded. This kit includes the Battery Combiner, cables and lugs.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010120110R
Voltage	12/24
LED Status Indication	No
Continuous Current	120 A
Cranking Rating (5 seconds)	180 A
Start Assist	Yes (Cyrix remains engaged during 30 seconds)
Protection Category	IP54
Dimensions	H46 x W46 x D80
Weight (kg)	0.11
Warranty	5 Years

Victron Energy Cyrix-ct 12/24V 120A Intelligent Battery Combiner â€“ CYR010120011

£44.89 INC. VAT
(£37.41 EXC. VAT)

The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

Features

Intelligent battery monitoring to prevent unwanted switching

Some battery combiners (also called voltage controlled relay, or split charge relay) will disconnect a battery in case of a short but high amperage load. A battery combiner also may fail to connect a large but discharged battery bank because the DC voltage immediately drops below the disengage value once the batteries are connected. The software of the Cyrix-ct 12/24 does more than simply connect and disconnect based on battery voltage and with a fixed time delay. The Cyrix-ct 12/24 looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend. (for Battery Combiners with multiple engage/disengage profiles, please see the Cyrix-i 400)

Protection against overheating (due to a long duration overload e.g.)

The Cyrix will disengage in case of excessive contact temperature, and reengage again after it has cooled down.

12/24 V auto ranging

The Cyrix-ct 12/24 automatically detects system voltage.

No voltage loss

Cyrix battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

Prioritising the starter battery

In a typical setup the alternator is directly connected to the starter battery. The accessory battery, and possibly also a bow thruster and other batteries are each connected to the starter battery with Cyrix battery combiners. When a Cyrix senses that the starter battery has reached the connect voltage it will engage, to allow for parallel charging of the other batteries.

Bidirectional voltage sensing and power supply from both batteries

The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.

The Cyrix-ct 12/24 has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate the Cyrix.

In order to prevent unexpected operation during installation or when one battery has been disconnected, the Cyrix-ct 12/24 will not close if the voltage on one of the two battery connections is lower than 2 V (12 V battery) or 4 V (24 V battery).

Parallel connection in case of emergency (Start Assist)

The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 seconds) or a switch to connect batteries in parallel manually.

This is especially useful in case of emergency when the starter battery is discharged or damaged.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010120011R
Voltage	12/24
Continuous Current	120A
Cranking Rating (5 seconds)	180A
Start Assist	Yes (Cyrix remains engaged during 30 seconds)
LED Status Indication	No
Control Cable Included (Length 1 m)	No
Protection Category	IP54
Dimensions	H46 x W46 x D80mm
Weight (kg)	0.11
Warranty	5 Years

Victron Energy Cyrix-ct 12/24V 120A Intelligent Battery Combiner â€“ CYR010120011R

£44.89 INC. VAT
(£37.41 EXC. VAT)

Features

Intelligent battery monitoring to prevent unwanted switching

Protection against overheating (due to a long duration overload e.g.)

The Cyrix will disengage in case of excessive contact temperature, and reengage again after it has cooled down.

12/24 V auto ranging

The Cyrix-ct 12/24 automatically detects system voltage.

No voltage loss

Prioritising the starter battery

Bidirectional voltage sensing and power supply from both batteries

The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.

The Cyrix-ct 12/24 has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate the Cyrix.

Parallel connection in case of emergency (Start Assist)

The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 seconds) or a switch to connect batteries in parallel manually.

This is especially useful in case of emergency when the starter battery is discharged or damaged.

Protection Category	IP54
Country of Manufacture	Malaysia
Manufacturer Part Number	CYR010120011R
Weight (kg)	0.11
Dimensions	H46 x W46 x D80mm
Brand	Victron Energy
Control Cable Included (Length 1 m)	No
LED Status Indication	No
Start Assist	Yes (Cyrix remains engaged during 30 seconds)
Cranking Rating (5 seconds)	180A
Voltage	12/24
Warranty	5 Years

Victron Energy Cyrix-ct 12/24V 230A Intelligent Battery Combiner â€“ CYR010230010R

£109.97 INC. VAT
(£91.64 EXC. VAT)

Features

Intelligent battery monitoring to prevent unwanted switching

Protection against overheating (due to a long duration overload e.g.)

The Cyrix will disengage in case of excessive contact temperature, and reengage again after it has cooled down.

12/24 V auto ranging

The Cyrix-ct 12/24 automatically detects system voltage.

No voltage loss

Prioritising the starter battery

Bidirectional voltage sensing and power supply from both batteries

The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.

The Cyrix-ct 12/24 has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate the Cyrix.

Parallel connection in case of emergency (Start Assist)

The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 seconds) or a switch to connect batteries in parallel manually.

This is especially useful in case of emergency when the starter battery is discharged or damaged.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010230010R
Voltage	12/24
Continuous Current	230A
Cranking Rating (5 seconds)	500A
Control Cable Included (Length 1 m)	Yes
Start Assist	Yes (Cyrix remains engaged during 30 seconds)
LED Status Indication	Yes
Protection Category	IP54
Dimensions	H65 x W100 x D50mm
Weight (kg)	0.27
Warranty	5 Years

Victron Energy Cyrix-i 12/24V 400A Intelligent Battery Combiner â€“ CYR010400000

£235.45 INC. VAT
(£196.21 EXC. VAT)

Features

New: intelligent battery monitoring to prevent unwanted switching

Some battery combiners will disconnect a battery in case of a short but high amperage load. A battery combiner also may fail to connect a large but discharged battery bank because the DC voltage immediately drops below the disengage value once the batteries are connected. The software of the Cyrix-i does more than simply connect and disconnect based on battery voltage and with a fixed time delay. The Cyrix-i looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend.

In addition, four switch timing profiles can be chosen.

12/24 V and 24/48 V auto ranging

The Cyrix-i automatically detects system voltage.

No voltage loss

Prioritizing the starter battery

Bidirectional voltage sensing and power supply from both batteries

The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.

The Cyrix-i has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate the Cyrix.

In order to prevent unexpected operation during installation or when one battery has been disconnected, the Cyrix-i will not close if the voltage on one of the two battery connections is lower than 2 V (12 V battery), or 4 V (24 V battery) or 8 V (48 V battery).

Parallel connection in case of emergency

The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 s) or a switch to connect batteries in parallel manually.

This is especially useful in case of emergency when the starter battery is discharged or damaged

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010400000
Voltage	12/24
Continuous Current	400A
Peak Current	2000A during 1 second
Current Consumption When Open	4 mA
Micro Switch For Remote Monitoring	Yes
LED Status Indication	Bicolour LED
Emergency Start	Yes, 30s
Dimensions	H78 x W102 x D110mm
Weight (kg)	0.9
Warranty	5 Years

Victron Energy Cyrix-i 24/48V 400A Intelligent Battery Combiner â€“ CYR020400000

£235.45 INC. VAT
(£196.21 EXC. VAT)

Features

New: intelligent battery monitoring to prevent unwanted switching

In addition, four switch timing profiles can be chosen.

12/24 V and 24/48 V auto ranging

The Cyrix-i automatically detects system voltage.

No voltage loss

Prioritizing the starter battery

Bidirectional voltage sensing and power supply from both batteries

The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.

The Cyrix-i has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate the Cyrix.

Parallel connection in case of emergency

The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 s) or a switch to connect batteries in parallel manually.

This is especially useful in case of emergency when the starter battery is discharged or damaged

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR020400000
Voltage	24/48
Continuous Current	400A
Peak Current	2000A during 1 second
Current Consumption When Open	4 mA
Micro Switch For Remote Monitoring	Yes
LED Status Indication	Bicolour LED
Emergency Start	Yes, 30s
Dimensions	H78 x W102 x D110mm
Weight (kg)	0.9
Warranty	5 Years

Victron Energy Cyrix-Li-charge 12/24V 120A Intelligent Charge Relay â€“ CYR010120430

£69.65 INC. VAT
(£58.04 EXC. VAT)

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay: â€“ if the Charge Disconnect output of the VE.Bus BMS is high, and â€“ if it senses 13,7V (resp. 27,4V or 54,8V) or more on its battery charger connection terminal, and â€“ if it senses 2V or more on its battery terminal (the Cyrix will remain open, if not connect to the battery).

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.

In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay of 3 seconds. After two attempts to reengage with 3 seconds delay, the delay increases to 10 minutes.

Whenever battery voltage is less than 13,5V (resp. 27V or 54V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7V or more, the Cyrix will re-engage, with 3 seconds delay

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010120430
Voltage	12/24
Continuous current & Breaking capacity at 12V or 24V	120A
Current Consumption When Open	4 mA
Protection Category	IP54
Dimensions	H46 x W46 x D80mm
Weight (kg)	0.11
Warranty	5 Years

Victron Energy Cyrix-Li-charge 12/24V 230A Intelligent Charge Relay â€“ CYR010230430

£148.44 INC. VAT
(£123.70 EXC. VAT)

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay:

if the charge disconnect output of the VE.Bus BMS is high, and
if it senses 13,7 V (resp. 27,4 V or 54,8 V) or more on its battery charger connection terminal, and
if it senses 2 V or more on its battery terminal (the Cyrix will remain open if not connect to the battery).

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.

In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds. After 2 attempts to reengage with 3 seconds delay, the delay increases to 10 minutes. Whenever battery voltage is less than 13,5 V (resp. 27 V or 54 V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5 V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7 V or more, the Cyrix will reengage, with 3 seconds delay.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010230430
Voltage	12/24
Continuous current & Breaking capacity at 12V or 24V	230A
Current Consumption When Open	4 mA
Control Cable Included (Length 1 m)	Yes
LED Status Indication	Yes
Protection Category	IP54
Dimensions	H65 x W100 x D50mm
Weight (kg)	0.27
Warranty	5 Years

Victron Energy Cyrix-Li-charge 24/48V 120A Intelligent Charge Relay â€“ CYR020120430

£69.65 INC. VAT
(£58.04 EXC. VAT)

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR020120430
Voltage	24/48
Continuous current & Breaking capacity at 12V or 24V	120A
Breaking Capacity at 48V	40A
Current Consumption When Open	4 mA
Protection Category	IP54
Dimensions	H46 x W46 x D80mm
Weight (kg)	0.11
Warranty	5 Years

Victron Energy Cyrix-Li-charge 24/48V 230A Intelligent Charge Relay â€“ CYR020230430

£148.44 INC. VAT
(£123.70 EXC. VAT)

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay:

if the charge disconnect output of the VE.Bus BMS is high, and
if it senses 13,7 V (resp. 27,4 V or 54,8 V) or more on its battery charger connection terminal, and
if it senses 2 V or more on its battery terminal (the Cyrix will remain open if not connect to the battery).

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR020230430
Voltage	24/48
Continuous current & Breaking capacity at 12V or 24V	230A
Breaking Capacity at 48V	80A
Current Consumption When Open	4 mA
Control Cable Included (Length 1 m)	Yes
LED Status Indication	Yes
Protection Category	IP54
Dimensions	H65 x W100 x D50mm
Weight (kg)	0.27
Warranty	5 Years

Victron Energy Cyrix-Li-ct 12/24V 120A Intelligent Li-ion Battery Combiner â€“ CYR010120412

£69.65 INC. VAT
(£58.04 EXC. VAT)

The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct.

The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery:

if the Charge Disconnect output of the VE.Bus BMS is high, and
if it senses 13,4V (resp. 26,8V) or more on one of its power terminals

The Cyrix will disengage immediately:

when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or
when battery voltage drops below 13,2V. Start assist function: a short positive pulse will close the relay during 30 seconds

A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010120412
Voltage	12/24
Continuous current & Breaking capacity at 12V or 24V	120A
Current Consumption When Open	4 mA
Protection Category	IP54
Dimensions	H46 x W46 x D80mm
Weight (kg)	0.11
Warranty	5 Years

Victron Energy Cyrix-Li-ct 12/24V 230A Intelligent Li-ion Battery Combiner â€“ CYR010230412

£148.44 INC. VAT
(£123.70 EXC. VAT)

The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct.

The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery:

if the charge disconnect output of the VE.Bus BMS is high, and
if it senses 13,4 V (resp. 26,8 V) or more on one of its power terminals

The Cyrix will disengage immediately:

when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or
when battery voltage drops below 13,2 V

Start assist function: a short positive pulse will close the relay during 30 seconds.

A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010230412
Voltage	12/24
Continuous current & Breaking capacity at 12V or 24V	230A
Current Consumption When Open	4 mA
Control Cable Included (Length 1 m)	Yes
LED Status Indication	Yes
Protection Category	IP54
Dimensions	H65 x W100 x D50mm
Weight (kg)	0.27
Warranty	5 Years

Victron Energy Cyrix-Li-load 12/24V 120A Intelligent Load Relay â€“ CYR010120450

£59.56 INC. VAT
(£49.63 EXC. VAT)

The Cyrix-Li-load will disengage when its control input becomes free floating. If the battery voltage recovers after disconnecting (which will happen when no other loads are connected to the battery), the output of the BMS will become high and the Cyrix will reengage after 30 seconds. After 3 attempts to reengage, the Cyrix will remain disengaged until battery voltage has increased to more than 13V (resp. 26V or 52V) during at least 30 seconds (which is a sign that the battery is being recharged). Alternatively, a BatteryProtect can be used (advantage: very low power consumption).Â

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR020400000
Voltage	24/48
Continuous Current	400A
Peak Current	2000A during 1 second
Current Consumption When Open	4 mA
Micro Switch For Remote Monitoring	Yes
LED Status Indication	Bicolour LED
Emergency Start	Yes, 30s
Dimensions	H78 x W102 x D110mm
Weight (kg)	0.9
Warranty	5 Years

Victron Energy Cyrix-Li-load 12/24V 230A Intelligent Load Relay â€“ CYR010230450

£148.44 INC. VAT
(£123.70 EXC. VAT)

The Cyrix-Li-load will disengage when its control input becomes free floating. If the battery voltage recovers after disconnection (which will happen when no other loads are connected to the battery), the output of the BMS will become high and the Cyrix will reengage after 30 seconds. After 3 attempts to reengage, the Cyrix will remain disengaged until battery voltage has increased to more than 13 V (resp. 26 V or 52 V) during at least 30 seconds (which is a sign that the battery is being recharged). Alternatively, a BatteryProtect can be used (advantage: very low power consumption).

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR010230450
Voltage	12/24
Continuous current & Breaking capacity at 12V or 24V	230A
Current Consumption When Open	4 mA
Control Cable Included (Length 1 m)	Yes
LED Status Indication	Yes
Protection Category	IP54
Dimensions	H65 x W100 x D50mm
Weight (kg)	0.27
Warranty	5 Years

Victron Energy Cyrix-Li-load 24/48V 120A Intelligent Load Relay â€“ CYR020120450

£59.56 INC. VAT
(£49.63 EXC. VAT)

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR020120450
Voltage	24/48
Continuous current & Breaking capacity at 12V or 24V	120A
Breaking Capacity at 48V	40A
Current Consumption When Open	4 mA
Protection Category	IP54
Dimensions	H46 x W46 x D80mm
Weight (kg)	0.11
Warranty	5 Years

Victron Energy Cyrix-Li-load 24/48V 230A Intelligent Charge Relay â€“ CYR020230450

£148.44 INC. VAT
(£123.70 EXC. VAT)

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	CYR020230450
Voltage	24/48
LED Status Indication	Yes
Continuous current & Breaking capacity at 12V or 24V	230A
Breaking Capacity at 48V	80 A
Current Consumption When Open	4 mA
Control Cable Included (Length 1 m)	Yes
Protection Category	IP54
Dimensions	H65 x W100 x D50mm
Weight (kg)	0.27
Warranty	5 Years

Victron Energy Digital Multi Control 200/200A â€“ REC020005010-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Digital Multi Control 200/200A â€“ REC020005010

£122.18 INC. VAT
(£101.82 EXC. VAT)

This panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.

CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	REC020005010
Dimensions	L120 x W65 x D3mm
Weight (kg)	0.2
Warranty	5 Years

Victron Energy Digital Multi Control 200/200A GX â€“ DMC000200010R-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Digital Multi Control 200/200A GX â€“ DMC000200010R

£107.16 INC. VAT
(£89.30 EXC. VAT)

The Digital Multi Control is used to remotely view and adjust AC input currents, and turn on and off the Multi or Quattro. It is designed to integrate cleanly with your boat, vehicle or house system control panel.

The Digital Multi Control panel (DMC) is designed to work with all Multi/Quattro. This includes stand alone, parallel and 2-3 phase configurations. Connecting the DMC to your system is simple, in most cases just connecting the DMC with an RJ45 cable is sufficient and no extra set-up handling is required.

CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	DMC000200010R
Dimensions	L120 x W85 x D17mm
Weight (kg)	0.3
Warranty	5 Years

Victron Energy DIN35 Adapter Large (2 pcs) â€“ ADA500180100-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy DIN35 Adapter Large (2 pcs) â€“ ADA500180100

£12.47 INC. VAT
(£10.39 EXC. VAT)

DIN-Rail adapter to easily mount a device on a DIN-Rail. Suitable for the Cerbo GX.

Brand	Victron Energy
Manufacturer Part Number	ADA500180100
gtin	8719076054511
Dimensions	L105 x W12.5 x D11mm
Weight	0.2Kg
Warranty	5 Years
Country of Manufacture	India

Victron Energy DIN35 adapter small (2 pcs) â€“ ADA500100100-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy DIN35 adapter small (2 pcs) â€“ ADA500100100

£10.26 INC. VAT
(£8.55 EXC. VAT)

Â DIN-Rail adapter to easily mount a device on a DIN-Rail. Suitable for the Cerbo GX.

Brand	Victron Energy
Manufacturer Part Number	ADA500100100
GTIN	8719076048640
Warranty	5 Years
Country of Manufacture	India

Victron Energy Diode Battery Combiners BCD 402 â€“ BCD000402000

£35.48 INC. VAT
(£29.57 EXC. VAT)

Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a diode battery combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V.

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	BCD000402000
Maximum Continuous Current (A)	40
Number Of Batteries	2
Connection	M6 Bolts
Dimensions	H60 x W120 x D75mm
Weight (kg)	0.8
Warranty	5 Years

Victron Energy Diode Battery Combiners BCD 802 â€“ BCD000802000

£43.69 INC. VAT
(£36.41 EXC. VAT)

The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V

Â CLICK HERE FOR SPEC SHEET

Brand	Victron Energy
Manufacturer Part Number	BCD000802000
Maximum Continuous Current (A)	80
Number Of Batteries	2
Connection	M6 Bolts
Dimensions	H60 x W120 x D75mm
Weight (kg)	0.8
Warranty	5 Years

Victron Energy Direct to USB Cable â€“ ASS030530010-Powerland

Customer Reviews

Based on 1 review Write a review

Victron Energy Direct to USB Cable â€“ ASS030530010

£25.66 INC. VAT
(£21.38 EXC. VAT)

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

Brand	Victron Energy
Manufacturer Part Number	ASS030530010
Warranty	5 Years

Victron Energy EasyPlus Compact 12/1600/70-16 VE.Bus â€“ CEP121620000

£921.24 INC. VAT
(£767.70 EXC. VAT)

CLICK HERE FOR SPEC SHEETS

The EasyPlus is a multifunctional energy system consisting of a powerful sine wave inverter, a sophisticated battery charger, a high speed AC transfer switch and AC distribution in a single light weight and compact enclosure. The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures.

Brand	Victron Energy
Manufacturer Part Number	CEP121620000
Voltage	12
Transfer Switch (A)	16
Cont. Output Power at 25Â°C (VA)	1600
Peak Power (W)	3000
Max Efficiency	92%
Zero Load Power (W)	8
Charge Current House Battery (A)	70
Charge Current Starter Battery (A)	4
Battery Temperature Sensor	Yes
Programmable Relay	Yes
Remote on-off	Optional
Protection Category	IP21
Dimensions	H510 x W214 x D110mm
Weight (kg)	11.7
Warranty	5 Years
Country of Manufacture	China

Victron Energy EasySolar 12/1600/70-16 with MPPT 100/50 â€“ CEP121621000

£1,204.68 INC. VAT
(£1,003.90 EXC. VAT)

CLICK HERE FOR SPEC SHEETS

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure.Â The product is easy to install, with a minimum of wiring.

Features

All-in-one solar power solution

The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

The solar charge controller: Blue Solar MPPT 100/50

Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.

The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40

The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.

AC distribution

The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers.

One 16A output is controlled by the AC input: it will switch on only when AC is available.

PowerAssist

Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Unique solar application software

Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.

Brand	Victron Energy
Manufacturer Part Number	CEP121620000
GTIN	8719076021599
Voltage	12V
Transfer Switch	16A
Continuous Output Power at 25Â°C	1600VA/1300W
Peak power	3000W
Charger Current House Battery	70A
Battery Temperature Sensor	Yes
Programmable Relay	Yes
Ingress Protection	IP22
Battery-Connection	Battery cables of 1.5 meter
Dimensions (Including Terminals)	H745 x W214 x D110mm
Weight	15Kg
Warranty	5 Years
Country of Manufacture	China

Victron Energy EasySolar 24/1600/40-16 with MPPT 100/50 â€“ CEP241621010

£1,204.68 INC. VAT
(£1,003.90 EXC. VAT)

CLICK HERE FOR SPEC SHEETS

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure.Â The product is easy to install, with a minimum of wiring.

Features

All-in-one solar power solution

The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.

The solar charge controller: Blue Solar MPPT 100/50

Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.

The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40

AC distribution

The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers.

One 16A output is controlled by the AC input: it will switch on only when AC is available.

PowerAssist

Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Unique solar application software

Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.

Brand	Victron Energy
Manufacturer Part Number	CEP241621010
GTIN	8719076021605
Voltage	24V
Transfer Switch	16A
Continuous Output Power at 25Â°C	1600VA/1300W
Peak power	3000W
Charger Current House Battery	40A
Battery Temperature Sensor	Yes
Programmable Relay	Yes
Ingress Protection	IP22
Battery-Connection	Battery cables of 1.5 meter
Dimensions (Including Terminals)	H745 x W214 x D110mm
Weight	15Kg
Warranty	5 Years

01527 962 968

Products

Customer Reviews

£179.00 INC. VAT (£149.17 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£104.46 INC. VAT (£87.05 EXC. VAT)

Standard Delivery: £7.99

£9.89 INC. VAT (£8.24 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£356.16 INC. VAT (£296.80 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£33.80 INC. VAT (£28.17 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£30.49 INC. VAT (£25.41 EXC. VAT)

Standard Delivery: £7.99

£88.88 INC. VAT (£74.07 EXC. VAT)

Standard Delivery: £7.99

£44.89 INC. VAT (£37.41 EXC. VAT)

Standard Delivery: £7.99

£44.89 INC. VAT (£37.41 EXC. VAT)

Standard Delivery: £7.99

£109.97 INC. VAT (£91.64 EXC. VAT)

Standard Delivery: £7.99

£235.45 INC. VAT (£196.21 EXC. VAT)

Standard Delivery: £7.99

£235.45 INC. VAT (£196.21 EXC. VAT)

Standard Delivery: £7.99

£69.65 INC. VAT (£58.04 EXC. VAT)

Standard Delivery: £7.99

£148.44 INC. VAT (£123.70 EXC. VAT)

Standard Delivery: £7.99

£69.65 INC. VAT (£58.04 EXC. VAT)

Standard Delivery: £7.99

£148.44 INC. VAT (£123.70 EXC. VAT)

Standard Delivery: £7.99

£69.65 INC. VAT (£58.04 EXC. VAT)

Standard Delivery: £7.99

£148.44 INC. VAT (£123.70 EXC. VAT)

Standard Delivery: £7.99

£59.56 INC. VAT (£49.63 EXC. VAT)

Standard Delivery: £7.99

£148.44 INC. VAT (£123.70 EXC. VAT)

Standard Delivery: £7.99

£59.56 INC. VAT (£49.63 EXC. VAT)

Standard Delivery: £7.99

£148.44 INC. VAT (£123.70 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£122.18 INC. VAT (£101.82 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£107.16 INC. VAT (£89.30 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£12.47 INC. VAT (£10.39 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£10.26 INC. VAT (£8.55 EXC. VAT)

Standard Delivery: £7.99

£35.48 INC. VAT (£29.57 EXC. VAT)

Standard Delivery: £7.99

£43.69 INC. VAT (£36.41 EXC. VAT)

Standard Delivery: £7.99

Customer Reviews

£25.66 INC. VAT (£21.38 EXC. VAT)

Standard Delivery: £7.99

£921.24 INC. VAT (£767.70 EXC. VAT)

Standard Delivery: £7.99

£1,204.68 INC. VAT (£1,003.90 EXC. VAT)

Standard Delivery:

£1,204.68 INC. VAT (£1,003.90 EXC. VAT)

Standard Delivery: £8.99

£179.00 INC. VAT
(£149.17 EXC. VAT)

£104.46 INC. VAT
(£87.05 EXC. VAT)

£9.89 INC. VAT
(£8.24 EXC. VAT)

£356.16 INC. VAT
(£296.80 EXC. VAT)

£33.80 INC. VAT
(£28.17 EXC. VAT)

£30.49 INC. VAT
(£25.41 EXC. VAT)

£88.88 INC. VAT
(£74.07 EXC. VAT)

£44.89 INC. VAT
(£37.41 EXC. VAT)

£44.89 INC. VAT
(£37.41 EXC. VAT)

£109.97 INC. VAT
(£91.64 EXC. VAT)

£235.45 INC. VAT
(£196.21 EXC. VAT)

£235.45 INC. VAT
(£196.21 EXC. VAT)

£69.65 INC. VAT
(£58.04 EXC. VAT)

£148.44 INC. VAT
(£123.70 EXC. VAT)

£69.65 INC. VAT
(£58.04 EXC. VAT)

£148.44 INC. VAT
(£123.70 EXC. VAT)

£69.65 INC. VAT
(£58.04 EXC. VAT)

£148.44 INC. VAT
(£123.70 EXC. VAT)

£59.56 INC. VAT
(£49.63 EXC. VAT)

£148.44 INC. VAT
(£123.70 EXC. VAT)

£59.56 INC. VAT
(£49.63 EXC. VAT)

£148.44 INC. VAT
(£123.70 EXC. VAT)

£122.18 INC. VAT
(£101.82 EXC. VAT)

£107.16 INC. VAT
(£89.30 EXC. VAT)

£12.47 INC. VAT
(£10.39 EXC. VAT)

£10.26 INC. VAT
(£8.55 EXC. VAT)

£35.48 INC. VAT
(£29.57 EXC. VAT)

£43.69 INC. VAT
(£36.41 EXC. VAT)

£25.66 INC. VAT
(£21.38 EXC. VAT)

£921.24 INC. VAT
(£767.70 EXC. VAT)

£1,204.68 INC. VAT
(£1,003.90 EXC. VAT)

£1,204.68 INC. VAT
(£1,003.90 EXC. VAT)