Victron Energy SmartSolar MPPT RS 450/100-Tr – SCC145110410
Regular price£1,124.05 INC. VAT (£936.71 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems.
Available in a 5.76kW and 11.52kW model, features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernise the presentation in line with the latest suite of Victron products.
Â
Features
Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller
The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV input and either 100A, or 200A output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required.
Â
Setup and monitor with VictronConnect
Multiple independent MPPT tracking inputs
With multiple MPPT trackers, you can optimize your solar panel design for maximum performance for your specific location.
Â
Daisy Chain Additional Units
Isolated PV connections for additional safety
Full galvanic isolation between PV and battery connections provide additional overall system safety.
Â
Wide MPPT voltage range
80 – 450 VDC PV operating range, with a 120VDC PV startup voltage.
Â
Light weight, efficient and quiet
Thanks to high frequency technology and a new design this powerful charger weighs only 7.9 kg for the 100A model. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.
Â
Display and Bluetooth
The display reads battery, and controller parameters. The parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect.
Â
PV Isolation resistance monitoring for peace of mind at higher voltages
The MPPT RS continuously monitors the PV array and can detect if there are faults that reduce the isolation of the panels to unsafe levels.
Â
VE.Can and VE.Direct port
For connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Can allows for up to 25 units to be connected together in parallel and synchronize their charging.
Â
I/O Connections
Programmable Relay, temperature sensor, auxiliary, digital input and voltage sensor connections. The remote input can accept the Victron smallBMS, and other BMS with allow-to-charge signal
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC145110410 |
| GTIN |
8719076049319 |
| Battery Voltage |
48 V |
| Rated Charge Current |
100 A |
| Maximum Charge Power |
5,8 kW at 57,6 V |
| Charge Voltage Absorption’ |
Default setting: 57,6 V (adjustable) |
| Charge Voltage 'Float' |
Default setting: 55,2 V (adjustable) |
| Programmable Voltage Range |
Minimum: 36 V, Maximum: 62 V |
| Charge Algorithm |
Multi-stage adaptive (adjustable) |
| Battery Temperature Sensor |
Included |
| Maximum efficiency |
96% |
| Self-consumption |
15 mA |
| Maximum DC PV Voltage |
450 V |
| Start-up voltage |
120 V |
| MPPT operating voltage range |
80 – 450 V |
| Number Of Trackers |
2 |
| Max. PV Operational Input Current |
18 A per tracker |
| Max. PV Short Circuit Current |
20 A per tracker |
| Maximum PV Array Size Per Tracker |
7200 Wp (450 V x 20 A) |
| Synchronised Parallel Operation |
Yes, up to 25 units with VE.Can |
| Programmable Relay |
Yes |
| Data Communication |
VE.Direct port, VE.Can port & Bluetooth |
| General Purpose Analogue/Digital In Port |
Yes, 2x |
| Remote on-off |
Yes |
| Protection Category |
IP21 |
| Battery-Connection |
M8 Bolts |
| Dimensions |
H400 x W313 x D126mm |
| Weight |
7.9Kg |
| Warranty |
5 Years |
