Filter
Products
2630 products
2630 products
Victron Energy Orion-Tr 48/12-9A (110W) Isolated DC-DC Converter – ORI481210110
Regular price£55.22 INC. VAT (£46.02 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
 Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI481210110 |
| Input Voltage Range |
32-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
12.2V |
| Output Voltage Adjust Range |
10-15V |
| Short Circuit Output Current |
27A |
| Cont. Output Power at 25°C |
110W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H100 x W113 x D47mm |
| Weight (kg) |
0.42 |
| Warranty |
5 Years |
Victron Energy Orion-Tr 48/24-12A (280W) Isolated DC-DC Converter – ORI482428110
Regular price£77.76 INC. VAT (£64.80 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI482428110 |
| Input Voltage Range |
32-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
24.2V |
| Output Voltage Adjust Range |
20-30V |
| Short Circuit Output Current |
30A |
| Cont. Output Power at 25°C |
320W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H130 x W186 x D70 mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Orion-Tr 48/24-16A (380W) Isolated DC-DC Converter – ORI482441110
Regular price£174.84 INC. VAT (£145.70 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI482441110 |
| Input Voltage Range |
40-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
24.2V |
| Output Voltage Adjust Range |
20-30V |
| Short Circuit Output Current |
40A |
| Cont. Output Power at 25°C |
430W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H130 x W186 x D70mm |
| Weight (kg) |
1.6 |
| Warranty |
5 Years |
Victron Energy Orion-Tr 48/24-5A (120W) Isolated DC-DC Converter – ORI482410110
Regular price£55.22 INC. VAT (£46.02 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI482410110 |
| Input Voltage Range |
32-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
24.2V |
| Output Voltage Adjust Range |
20-30V |
| Short Circuit Output Current |
25A |
| Cont. Output Power at 25°C |
120W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H100 x W113 x D47mm |
| Weight (kg) |
0.42 |
| Warranty |
5 Years |
Victron Energy Orion-Tr 48/48-2.5A (120W) Isolated DC-DC Converter – ORI484810110
Regular price£55.22 INC. VAT (£46.02 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI484810110 |
| Input Voltage Range |
32-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
48.2V |
| Output Voltage Adjust Range |
40-60V |
| Short Circuit Output Current |
17A |
| Cont. Output Power at 25°C |
120W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H100 x W113 x D47mm |
| Weight (kg) |
0.42 |
| Warranty |
5 Years |
Victron Energy Orion-Tr 48/48-6A (280W) Isolated DC-DC Converter – ORI484828110
Regular price£77.76 INC. VAT (£64.80 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI484828110 |
| Input Voltage Range |
32-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
48.2V |
| Output Voltage Adjust Range |
40-60V |
| Short Circuit Output Current |
25A |
| Cont. Output Power at 25°C |
320W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H130 x W186 x D70 mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Orion-Tr 48/48-8A (380W) Isolated DC-DC Converter – ORI484841110
Regular price£174.84 INC. VAT (£145.70 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Â
Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.Â
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.Â
IP43 protection
When installed with the screw terminals oriented downwards.Â
Screw terminals
No special tools needed for installation.
Input fuse
On 12V and 24V input models only.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI484841110 |
| Input Voltage Range |
40-70V |
| Under Voltage Shutdown |
28V |
| Under Voltage Restart |
30V |
| Nominal Output Voltage |
48.2V |
| Output Voltage Adjust Range |
40-60V |
| Short Circuit Output Current |
25A |
| Cont. Output Power at 25°C |
430W |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H130 x W186 x D70mm |
| Weight (kg) |
1.6 |
| Warranty |
5 Years |
Victron Energy Orion-Tr Isolated DC-DC Charger remote cable – ASS070300100
Regular price£13.92 INC. VAT (£11.60 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
In the Orion-Tr Isolated DC-DC Chargers the remote on/off circuit is referenced to the primary battery (e.g. starter battery). The Orion-Tr DC-DC Charger Isolated remote cable is intended for applications where the remote on/off signal is referenced to the secondary battery (e.g. lithium battery with BMS).
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ASS070300100 |
| gtin |
8719076052777 |
| Country of Manufacture |
India |
Victron Energy Orion-Tr Smart 12/12-18A (220W) Isolated DC-DC Charger – ORI121222120
Regular price£158.72 INC. VAT (£132.27 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI121222120 |
| GTIN |
8719076046066 |
| Input Voltage Range |
8-17V |
| Under voltage shut down |
7V |
| Under Voltage Restart |
7.5V |
| Nominal Output Voltage |
12.2V |
| Output Voltage Adjust Range |
10-15V |
| Cont. output current at nominal output voltage and 40°C |
18A |
| Short Circuit Output Current |
40A |
| Cont. Output Power at 25°C |
280W |
| Cont. output power at 40°C |
220W |
| Efficiency |
87% |
| DC Connection |
Screw Terminals |
| IP Rating |
IP43 |
| Dimensions |
H130 x W186 x D70mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC Charger – ORI121236120
Regular price£211.86 INC. VAT (£176.55 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI121236120 |
| GTIN |
8719076047698 |
| Input Voltage Range |
10-17 V |
| Under Voltage Shutdown |
7 V |
| Under Voltage Restart |
7.5 V |
| Nominal Output Voltage |
12.2 V |
| Output Voltage Adjust Range |
10-15 V |
| Cont. output current at nominal output voltage and 40°C |
30A |
| Short Circuit Output Current |
60 A |
| Cont. Output Power at 25°C |
430 W |
| Cont. output power at 40°C |
360W |
| Efficiency |
87% |
| DC Connection |
Screw Terminals |
| IP Rating |
IP43 |
| Dimensions |
H130 x W186 x D80 mm |
| Weight |
1.8Kg |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 12/12-30A (360W) Non-Isolated DC-DC Charger – ORI121236140
Regular price£186.32 INC. VAT (£155.27 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
 PLEASE CLICK HERE FOR SPEC SHEET
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI121236140 |
| Input voltage range |
10-17V |
| Under voltage shut down |
7V |
| Under voltage restart |
7.5V |
| Nominal output voltage |
12.2V |
| Output voltage adjust range |
10-15V |
| Cont. output current at nominal output voltage and 40°C |
30A |
| Short circuit output current |
60A |
| Cont. output power at 25°C |
430W |
| Cont. output power at 40°C |
360W |
| Efficiency |
87% |
| DC connection |
Screw Terminals |
| IP Rating |
IP43 |
| Dimensions |
H130 x W186 x D80mm |
| Weight |
1.8Kg |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 12/24-10A (240W) Isolated DC-DC Charger – ORI122424120
Regular price£138.55 INC. VAT (£115.46 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI122424120 |
| Warranty |
5 Years |
| Weight (kg) |
1.3 |
| Efficiency |
88% |
| Dimensions |
H130 x W186 x D70mm |
| Input Voltage Range |
8-17 V |
| Protection Category |
IP43 |
| Nominal Output Voltage |
24.2 V |
| Output Voltage Adjust Range |
20-30 V |
| Under Voltage Shutdown |
7 V |
| Under Voltage Restart |
7.5 V |
| DC Connection |
Screw Terminals |
| Cont. Output Power at 25°C (W) |
280 |
| Cont. Output Power at 40°C (W) |
240 |
Victron Energy Orion-Tr Smart 12/24-15A (360W) Isolated DC-DC Charger – ORI122436120
Regular price£211.86 INC. VAT (£176.55 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI122436120 |
| Warranty |
5 Years |
| Weight (kg) |
1.8 |
| Dimensions |
H130 x W186 x D80 mm |
| Input Voltage Range |
10-17 V |
| Protection Category |
IP43 |
| Power Rating (W) |
360 |
| Nominal Output Voltage |
24.2 V |
| Output Voltage Adjust Range |
20-30 V |
| Short Circuit Output Current |
40 A |
| Cont. Output Power at 25°C |
430 W |
| Under Voltage Shutdown |
7 V |
| Under Voltage Restart |
7.5 V |
| DC Connection |
Screw Terminals |
Victron Energy Orion-Tr Smart 12/24-15A (360W) Non-isolated DC-DC Charger – ORI122436140
Regular price£186.32 INC. VAT (£155.27 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
 PLEASE CLICK HERE FOR SPEC SHEET
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI122436140 |
| Input voltage range |
10-17V |
| Under voltage shut down |
7V |
| Under voltage restart |
7.5V |
| Nominal output voltage |
24.2V |
| Output voltage adjust range |
20-30V |
| Cont. output current at nominal output voltage and 40°C |
15A |
| Short circuit output current |
40A |
| Cont. output power at 25°C |
430W |
| Cont. output power at 40°C |
360W |
| Efficiency |
88% |
| DC connection |
Screw Terminals |
| IP Rating |
IP43 |
| Dimensions |
H130 x W186 x D80mm |
| Weight |
1.8Kg |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 24/12-20A (240W) Isolated DC-DC Charger – ORI241224120
Regular price£108.86 INC. VAT (£90.72 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI241224120 |
| Input Voltage Range |
16-35V |
| Output Voltage Adjust Range |
10-15V |
| Nominal Output Voltage |
12.2V |
| Cont. Output Power at 25°C (W) |
300W |
| Cont. Output Power at 40°C (W) |
240W |
| Under Voltage Shutdown |
14V |
| Under Voltage Restart |
15V |
| DC Connection |
Screw Terminals |
| Efficiency |
88% |
| Protection Category |
IP43 |
| Dimensions |
H130 x W186 x D70mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 24/12-30A (360W) Isolated DC-DC Charger – ORI241236120
Regular price£211.86 INC. VAT (£176.55 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI241236120 |
| Warranty |
5 Years |
| Weight (kg) |
1.6Kg |
| Dimensions |
H130 x W186 x D70mm |
| Input Voltage Range |
20-35 V |
| Protection Category |
IP43 |
| Power Rating (W) |
360 |
| Nominal Output Voltage |
12.2 V |
| Output Voltage Adjust Range |
10-15 V |
| Short Circuit Output Current |
60 A |
| Cont. Output Power at 25°C |
430 W |
| Under Voltage Shutdown |
14 V |
| Under Voltage Restart |
15 V |
Victron Energy Orion-Tr Smart 24/12-30A (360W) Non-isolated DC-DC Charger – ORI241236140
Regular price£186.32 INC. VAT (£155.27 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
Â
 PLEASE CLICK HERE FOR SPEC SHEET
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI241236140 |
| GTIN |
8719076048978 |
| Input Voltage Range |
20-35V |
| Under voltage shut down |
14V |
| Under Voltage Restart |
15V |
| Nominal Output Voltage |
12.2V |
| Output Voltage Adjust Range |
10-15V |
| Cont. output current at nominal output voltage and 40°C |
30A |
| Short Circuit Output Current |
60A |
| Cont. Output Power at 25°C |
430W |
| Cont. output power at 40°C |
360W |
| Efficiency |
88% |
| DC Connection |
Screw Terminals |
| IP Rating |
IP43 |
| Dimensions |
H130 x W186 x D80mm |
| Weight |
1.8Kg |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 24/24-12A (280W) Isolated DC-DC Charger – ORI242428120
Regular price£138.55 INC. VAT (£115.46 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI242428120 |
| Input Voltage Range |
16-35V |
| Under Voltage Shutdown |
14V |
| Under Voltage Restart |
15V |
| Nominal Output Voltage |
24.2V |
| Output Voltage Adjust Range |
20-30V |
| Cont. Output Power at 25°C (W) |
320W |
| Cont. Output Power at 40°C (W) |
280W |
| Efficiency |
89% |
| DC Connection |
Screw Terminals |
| Protection Category |
IP43 |
| Dimensions |
H130 x W186 x D70mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Orion-Tr Smart 24/24-17A (400W) Isolated DC-DC Charger – ORI242440120
Regular price£211.86 INC. VAT (£176.55 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI242440120 |
| Warranty |
5 Years |
| Weight (kg) |
1.6 |
| Dimensions |
H130 x W186 x D70mm |
| Input Voltage Range |
20-35 V |
| Protection Category |
IP43 |
| Power Rating (W) |
400 |
| Nominal Output Voltage |
24.2 V |
| Output Voltage Adjust Range |
20-30 V |
| Short Circuit Output Current |
40 A |
| Cont. Output Power at 25°C |
480 W |
| Under Voltage Shutdown |
14 V |
| Under Voltage Restart |
15 V |
| DC Connection |
Screw Terminals |
Victron Energy Orion-Tr Smart 24/24-17A (400W) Non-isolated DC-DC Charger – ORI242440140
Regular price£186.32 INC. VAT (£155.27 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Â
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Â
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
 PLEASE CLICK HERE FOR SPEC SHEET
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
ORI242440140 |
| Input voltage range |
20-35V |
| Under voltage shut down |
14V |
| Under voltage restart |
15V |
| Nominal output voltage |
24.2V |
| Output voltage adjust range |
20-30V |
| Cont. output current at nominal output voltage and 40°C |
17A |
| Short circuit output current |
40A |
| Cont. output power at 25°C |
480W |
| Cont. output power at 40°C |
400W |
| Efficiency |
89% |
| DC connection |
Screw Terminals |
| IP Rating |
IP43 |
| Dimensions |
H130 x W186 x D80mm |
| Weight |
1.6Kg |
| Warranty |
5 Years |
Victron Energy Outdoor 2G and 3G GSM Antenna – GSM900100100
Regular price£28.42 INC. VAT (£23.68 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Â
Outdoor 2G and 3G GSM AntennaÂ
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
GSM900100100 |
| Warranty |
5 Years |
Victron Energy Outdoor 4G GSM Antenna – GSM900100400
Regular price£28.42 INC. VAT (£23.68 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Â
This antenna is optimised for 4G frequency bands, and as such will have slightly better reception on the 4G network.Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
GSM900100400 |
| GTIN |
8719076052951 |
| Weight |
0.01Kg |
| Warranty |
5 Years |
Victron Energy Peak Power Pack 12.8V 20Ah 256Wh – PPP012020000
Regular price£387.68 INC. VAT (£323.07 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.
A lithium-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger, and suitable for high discharge currents.
Nominal voltage: 12.8V
Battery capacity: 8Ah to 40Ah (not suitable for parallel or series connection)
Â
Features
Lightweight and easy to install
- Ideal for mobile applications.
Effective protection against improper use
- Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries.
Storage mode
- Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage.
Remote control with status indicator
- Push button (supplied) with a dual-colour LED status indicator:
- Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED.
- Hold down for 2 seconds: high capacity output always activated, slow flashing red LED.
- Hold down for 5 seconds: storage mode, blue LED flashes 10 times.
- Battery is charged via input 1:slow flashing blue LED.
- Battery fully charged: blue LED.
- Overload or overheating: flashing red LED.
VE.Direct port: can be connected to a PC or smartphone
(‘VE.Direct to USB’ or ‘VE.Direct Bluetooth Smart dongle’ required)
– Operation:
- Output 1: on / 30-minute timer / off
- Output 2: on/off
- Input 1: on/off
– Monitoring:
- Battery voltage
- Temperature and alarms
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PPP012020000 |
| Voltage |
12.8 |
| Capacity (C20) |
20 |
| Stored Energy |
256Wh |
| Battery Technology |
Lithium |
| Continuous Output Current |
150A |
| Short-circuit Current |
300A |
| Dimensions (Including Terminals) |
H132 x W190 x D172mm |
| Weight (kg) |
3.8 |
| Warranty |
3 Years |
Victron Energy Peak Power Pack 12.8V 30Ah 384Wh – PPP012030000
Regular price£536.99 INC. VAT (£447.49 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.
A lithium-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger, and suitable for high discharge currents.
Nominal voltage: 12.8V
Battery capacity: 8Ah to 40Ah (not suitable for parallel or series connection)
Â
Features
Lightweight and easy to install
- Ideal for mobile applications.
Effective protection against improper use
- Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries.
Storage mode
- Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage.
Remote control with status indicator
- Push button (supplied) with a dual-colour LED status indicator:
- Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED.
- Hold down for 2 seconds: high capacity output always activated, slow flashing red LED.
- Hold down for 5 seconds: storage mode, blue LED flashes 10 times.
- Battery is charged via input 1:slow flashing blue LED.
- Battery fully charged: blue LED.
- Overload or overheating: flashing red LED.
VE.Direct port: can be connected to a PC or smartphone
(‘VE.Direct to USB’ or ‘VE.Direct Bluetooth Smart dongle’ required)
– Operation:
- Output 1: on / 30-minute timer / off
- Output 2: on/off
- Input 1: on/off
– Monitoring:
- Battery voltage
- Temperature and alarms
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PPP012030000 |
| Voltage |
12.8 |
| Capacity (C20) |
30 |
| Stored Energy |
384Wh |
| Battery Technology |
Lithium |
| Continuous Output Current |
150A |
| Short-circuit Current |
300A |
| Dimensions (Including Terminals) |
H172 x W190 x D172mm |
| Weight (kg) |
5.4 |
| Warranty |
3 Years |
Victron Energy Peak Power Pack 12.8V 40Ah 512Wh– PPP012040000
Regular price£671.99 INC. VAT (£559.99 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.
A lithium-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger, and suitable for high discharge currents.
Nominal voltage: 12.8V
Battery capacity: 8Ah to 40Ah (not suitable for parallel or series connection)
Â
Features
Lightweight and easy to install
- Ideal for mobile applications.
Effective protection against improper use
- Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries.
Storage mode
- Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage.
Remote control with status indicator
- Push button (supplied) with a dual-colour LED status indicator:
- Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED.
- Hold down for 2 seconds: high capacity output always activated, slow flashing red LED.
- Hold down for 5 seconds: storage mode, blue LED flashes 10 times.
- Battery is charged via input 1:slow flashing blue LED.
- Battery fully charged: blue LED.
- Overload or overheating: flashing red LED.
VE.Direct port: can be connected to a PC or smartphone
(‘VE.Direct to USB’ or ‘VE.Direct Bluetooth Smart dongle’ required)
– Operation:
- Output 1: on / 30-minute timer / off
- Output 2: on/off
- Input 1: on/off
– Monitoring:
- Battery voltage
- Temperature and alarms
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PPP012040000 |
| Voltage |
12.8 |
| Capacity (C20) |
40 |
| Stored Energy |
512Wh |
| Battery Technology |
Lithium |
| Continuous Output Current |
150A |
| Dimensions (Including Terminals) |
H212 x W190 x D172mm |
| Short-circuit Current |
300A |
| Weight (kg) |
8.6 |
| Warranty |
3 Years |
Victron Energy Phoenix Charger 12/30 (2+1) – PCH012030001
Regular price£425.18 INC. VAT (£354.32 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz. The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.
Â
Features
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage
The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.
Â
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
Â
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
Â
Less maintenance and aging when the battery is not in use: the Storage mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Â
To increase battery life: temperature compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.
Â
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Â
Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400 V DC supply.
Â
Computer interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VEConfigure software, which can be downloaded free of charge from the Victron Energy website and the data link MK3-USB (see accessories), all parameters of the chargers can be customised.
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PCH012030001 |
| Voltage |
12 |
| Charger Current House Battery |
30A |
| Charger Current Starter Battery |
4A |
| Recommended Battery Capacity |
100 – 400Ah |
| Battery Connection |
M6 Studs |
| Outputs |
2+1 |
| IP Rating |
IP21 |
| Dimensions |
H350 x W200 x D108mm |
| Weight (kg) |
3.8 |
| Warranty |
5 Years |
Victron Energy Phoenix Charger 12/50 (2+1) – PCH012050001
Regular price£567.89 INC. VAT (£473.24 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz. The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.
Â
Features
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage
The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.
Â
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
Â
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
Â
Less maintenance and aging when the battery is not in use: the Storage mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Â
To increase battery life: temperature compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.
Â
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Â
Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400 V DC supply.
Â
Computer interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VEConfigure software, which can be downloaded free of charge from the Victron Energy website and the data link MK3-USB (see accessories), all parameters of the chargers can be customised.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PCH012050001 |
| Voltage |
12 |
| Charger Current House Battery |
50A |
| Charger Current Starter Battery |
4A |
| Recommended Battery Capacity |
200 – 800Ah |
| Battery Connection |
M6 Studs |
| Outputs |
2+1 |
| IP Rating |
IP21 |
| Dimensions |
H350 x W200 x D108mm |
| Weight (kg) |
3.8 |
| Warranty |
5 Years |
Victron Energy Phoenix Charger 24/16 (2+1) – PCH024016001
Regular price£425.18 INC. VAT (£354.32 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz. The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.
Â
Features
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage
The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.
Â
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
Â
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
Â
Less maintenance and aging when the battery is not in use: the Storage mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Â
To increase battery life: temperature compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.
Â
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Â
Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400 V DC supply.
Â
Computer interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VEConfigure software, which can be downloaded free of charge from the Victron Energy website and the data link MK3-USB (see accessories), all parameters of the chargers can be customised.
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PCH024016001 |
| Voltage |
24 |
| Charger Current House Battery |
16A |
| Charger Current Starter Battery |
4A |
| Recommended Battery Capacity |
100 – 200Ah |
| Battery Connection |
M6 Studs |
| Outputs |
2+1 |
| IP Rating |
IP21 |
| Dimensions |
H350 x W200 x D108mm |
| Weight (kg) |
3.8 |
| Warranty |
5 Years |
Victron Energy Phoenix Charger 24/25 (2+1) – PCH024025001
Regular price£568.14 INC. VAT (£473.45 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz. The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.
Â
Features
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage
The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.
Â
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
Â
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
Â
Less maintenance and aging when the battery is not in use: the Storage mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Â
To increase battery life: temperature compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.
Â
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Â
Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400 V DC supply.
Â
Computer interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VEConfigure software, which can be downloaded free of charge from the Victron Energy website and the data link MK3-USB (see accessories), all parameters of the chargers can be customised.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PCH024025001 |
| Voltage |
24 |
| Charger Current House Battery |
25A |
| Charger Current Starter Battery |
4A |
| Recommended Battery Capacity |
100 – 400Ah |
| Battery Connection |
M6 Studs |
| Outputs |
2+1 |
| IP Rating |
IP21 |
| Dimensions |
H350 x W200 x D108mm |
| Weight (kg) |
3.8 |
| Warranty |
5 Years |
Victron Energy Phoenix Inverter 12/1200 12V 1200VA VE.Direct UK - PIN122121400
Regular price£305.82 INC. VAT (£254.85 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Â
Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Â
Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Monitoring:
- In- and output voltage, % load and alarms
- Â
- Â
- Â
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Â
| GTIN | 8719076054948 |
| Voltage | 12V |
| Cont. output power at 25°C | 1200VA |
| Peak Power | 2200W |
| Output AC Voltage | 230V |
| Efficiency | 91% |
| Bluetooth Enabled | No |
| Plug Type | UK |
| Protection Category | IP21 |
| Dimensions | H117 x W232 x D362mm |
| Weight | 7.4Kg |
| Warranty | 5 Years |
| Country of Manufacture | China |
Victron Energy Phoenix Inverter 12/1600 230V Smart – PIN122161000
Regular price£640.22 INC. VAT (£533.52 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Â
The Phoenix Inverter 12/1600 Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
 Features of the Phoenix 12/1600 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
 VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
 Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
 To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
 Control over system
Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 12/1600 Smart, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
PIN122161000 |
| gtin |
8719076057505 |
| Voltage |
12V |
| Cont. Output Power at 25°C |
1600VA |
| Peak Power |
3000W |
| Output AC Voltage |
230V |
| Efficiency |
92% |
| Protection Category |
IP21 |
| Dimensions |
H485 x W219 x D125mm |
| Weight |
12Kg |
| Warranty |
5 Years |
| Bluetooth Enabled |
Yes |
| Country of Manufacture |
China |
| Peak Power |
3000W |
Victron Energy Phoenix Inverter 12/2000 230V Smart – PIN122201000
Regular price£723.90 INC. VAT (£603.25 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Phoenix Inverter 12/2000 Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.Â
Â
Features of the Phoenix 12/2000 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
 VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Â
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
Â
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Â
Control over system
Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 12/1600 Smart, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Welcome to Powerland Battery Centre! If you have any questions or require expert advise please feel free to contact us either via Phone, Email or our 24/7 Online chat.