RESU Plus is an expansion kit specially designed for 48V models of new RESU series.

With RESU Plus, all 48V models can be cross-connected with each other - Maximum 2 batteries

•  Dimension: 385 x 240 x 65 (W x H x D, mm)
•  Number of Expandable Battery Units: Up to 2EA
• IP55 

SE-EV-KIT-15M32-2

EV charger cable and holder, 4.5m, Type 2, 32A Version 2

For use with SolarEdge EV charging systems only

 

Supplier Part No: SE-EV-KIT-15M32-2

Weight: 3.105 kg

myenergi Retrofit Tamper Kit 

 

Supplier Part No: TAMPER KIT 2.1

Weight: 0.02 kg

Covers for EVBox BusinessLine charging stations.

Two covers required for double charging stations.

 

Supplier Part No: 707016-M

Weight: 1.8 kg

Covers for EVBox BusinessLine charging stations.

Two covers required for double charging stations.

 

Supplier Part No: 709016-M

Weight: 1.8 kg

Single phase voltage monitoring and protection unit which allows for the connection of 1 x 32A single phase charge point to the existing PME earth facility.

The unit incorpoates a unique monitoring device which disconnects all poles, inclusing CPC, in the event of a fault and has a built in double pole Type A RCBO.

This device does not require earth rods or measuring electrodes to function

• BS:7671 18th edition compliant
• Suitable for 1 x 32A load
• Built in Type A RCBO
• Standard 3 year parts warranty
• Simple wire in wire out connection
• Standard mild steel IP2X enclosure

 

Supplier Part No: SP-EVCP-R(W)

Weight: 2.5 kg

SE6000H-RW000BNV4

SolarEdge’s EV charging single phase inverter enables homeowners to charge their electric vehicles directly from the power of the sun, maximizing solar usage and further reducing electricity bills. This charger/inverter also enables charging up to 2.5 times faster than a standard EV charger through an innovative solar boost mode that uses grid and PV charging simultaneously.

In addition to the reduced hassle of installing a standalone EV charger and a PV inverter separately, homeowners can track their charging status, control vehicle charging, and set charging schedules using the fully integrated SolarEdge monitoring platform.

Optimized installation with HD-Wave inverter technology and integrated EV charger

• Specifically designed to work with power optimizers
• Record-breaking efficiency
• Fixed voltage inverter for longer strings
• Extremely small and easy to install outdoors or indoors
• High reliability without any electrolytic capacitors
• Integrated Mode 3 EV charger with solar boost mode charging (grid & PV)
• EV charger cable and holder ordered separately for flexible cable length selection
• Built-in module-level monitoring

Please note EV charging from PV is only possible when at least 1.5kW is available from solar.

Please note the SE EV inverter is capable of pulling up to 32A from the grid when EV charging, please size your AC circuit accordingly! Alternatively if that’s not possible, please set the Circuit Breaker Rating DIP Switch on SE EV inverter to match the AC cable/MCB rating in the property.

SolarEdge Energy Meter and CT are required to charge from excess PV.  EV charging cables sold separately. 

 

Supplier Part No: SE6000H-RW000BNV4

Weight: 11.9 kg

Rated Power: 6,000 W

Min PPT Voltage: 0 V

Max PPT Voltage: 0 V

DC Startup Voltage: 0 V

DC Shutdown Voltage: 0 V

Max Input Voltage: 480 V

Max DC Power: 9,300 W

Max AC Power (5 Minutes): 6,000 W

Surge AC Power (1 Second): 6,000 W

Max DC Current: 16.5 A

Max DC Inputs: 2

Has DC Fuses: 0

Connector: MC4  

Included Connectors: 2

Euro Efficiency: 99 %

Transformer: None

MPPT Quantity : 0

Has Integrated DC Switch: Yes

Warranty: 12 years

Single Phase Inverters with HD-Wave Technology and SetAPP 

The SolarEdge single phase inverter with HD-Wave technology breaks the mould of traditional solar inverters. Winner of the prestigious 2016 Intersolar Award and the renowned 2018 Edison Award, the single phase Inverter is specifically designed to work with SolarEdge power optimizers and features a standard 12-year warranty extendable to 20 or 25 years.

SolarEdge’s Innovative Inverter Topology

MPPT in Optimisers means inverter is only responsible for DC to AC inversion. This means inverter is simpler, more cost effective and more reliable. The fixed string voltage ensures operation at the highest efficiency at all times independent of string length and temperature.

HD-Wave Technology: A New Era for PV Inverters

Latest generation inverter HD-Wave technology means the inverters can be smaller and lighter than ever. The record-breaking 99% efficiency allows more energy production for an improved ROI.

Easy Inverter Commissioning with Inverter SetApp

SolarEdge single phase inverters have not display. They use a smart new commissioning method directly through a smartphone using the intuitive SetApp mobile application.

Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.

Please note: LG Chem PRIME compatibility is expected for Q1 2022 for the 8000H & 10000H.

 

Supplier Part No: SE8000H-RW000BNN4

Weight: 16.5 kg

Rated Power: 8,000 W

Min PPT Voltage: 0 V

Max PPT Voltage: 0 V

DC Startup Voltage: 0 V

DC Shutdown Voltage: 0 V

Max Input Voltage: 480 V

Max DC Power: 16,000 W

Max AC Power (5 Minutes): 8,000 W

Surge AC Power (1 Second): 8,000 W

Max DC Current: 20.5 A

Max DC Inputs: 3

Has DC Fuses: 0

Connector: MC4  

Included Connectors: 6

Euro Efficiency: 99 %

Transformer: None

MPPT Quantity : 0

Has Integrated DC Switch: Yes

Warranty: 12 years

Solar Edge 8000 3phase inverter with Set APP function (no display)

SE8K-RW0TEBNN4

THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION.

The SolarEdge inverters combine a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability.

The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions.

UK only: This inverter has been tested and certified according to G98 or G99, but only with the most recent Firmware version. Please update the inverter firmware during SetAPP phone app commissioning process as per the per Installation Manual.

Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.

 

Supplier Part No: SE8K-RW0TEBEN4

Weight:16.4 kg

Rated Power: 8,000 W

Min PPT Voltage: 750 V

Max PPT Voltage: 900 V

DC Startup Voltage: 0 V

DC Shutdown Voltage: 0 V

Max Input Voltage: 900 V

Max DC Power: 10,800 W

Max AC Power (5 Minutes) :7,000 W

Surge AC Power (1 Second): 7,000 W

Max DC Current: 13.5 A

Max DC Inputs: 2

Has DC Fuses: 0

Connector: MC4  

Included Connectors: 4

Euro Efficiency: 97.4 %

Transformer: None

MPPT Quantity : 0

Has Integrated DC Switch: Yes

Warranty: 12 years

Solar Edge 9000 3phase inverter with Set APP function (no display)

SE9K-RW0TEBNN4

THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION.

The SolarEdge inverters combine a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability.

The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions.

UK only: This inverter has been tested and certified according to G98 or G99, but only with the most recent Firmware version. Please update the inverter firmware during SetAPP phone app commissioning process as per the per Installation Manual.

Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.

 

Supplier Part No: SE9K-RW0TEBEN4

Weight: 16.4 kg

Rated Power: 9,000 W

Min PPT Voltage: 750 V

Max PPT Voltage: 900 V

DC Startup Voltage: 0 V

DC Shutdown Voltage: 0 V

Max Input Voltage: 900 V

Max DC Power: 9,450 W

Max AC Power (5 Minutes): 7,000 W

Surge AC Power (1 Second): 7,000 W

Max DC Current: 12 A

Max DC Inputs: 2

Has DC Fuses: 0

Connector: MC4  

Included Connectors: 0

Euro Efficiency: 97.4 %

Transformer: None

MPPT Quantity : 0

Has Integrated DC Switch: Yes

Warranty: 12 years

Solar Edge 10000 3phase inverter with Set APP function (no display)

SE10K-RW0TEBNN4

THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION.

The SolarEdge inverters combine a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability.

The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions.

UK only: This inverter has been tested and certified according to G98 or G99, but only with the most recent Firmware version. Please update the inverter firmware during SetAPP phone app commissioning process as per the per Installation Manual.

Please note: This inverter does not have a display. It is a new Comms Board version and set up and commissioning need to be done using Solar Edge SetAPP mobile application.

 

Supplier Part No: SE10K-RW0TEBEN4

Weight: 16.4 kg

Rated Power: 10,000 W

Min PPT Voltage: 750 V

Max PPT Voltage: 900 V

DC Startup Voltage: 0 V

DC Shutdown Voltage: 0 V

Max Input Voltage: 900 V

Max DC Power: 13,000 W

Max AC Power (5 Minutes): 10,000 W

Surge AC Power (1 Second): 10,000 W

Max DC Current: 16.5 A

Max DC Inputs: 2

Has DC Fuses: 0

Connector: MC4  

Included Connectors: 4

Euro Efficiency: 97.6 %

Transformer: None

MPPT Quantity : 0

Has Integrated DC Switch: Yes

Warranty: 12 years

S5-GC36K - Series 5 Three Phase Grid-Tied Inverter

Product Features:

• Max. efficiency of 98.7% 
• Type-II over-voltage surge protection for both DC and AC
• Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V
• 32A input per MPPT, 16A input for each PV string
• Maximum AC output power of 39.6kW 
• 4 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch
• Intelligent monitoring, Smart I-V Curve Diagnosis
• Integrated AFCI (DC arc-fault circuit protection)
• IP66 Rated 
• DC reverse-polarity protection
• 5-year standard warranty

Register on SolisCloud, to support remote upgrade and control.

SA: NRS-097-2-1 Certified

EU: German installation manual stlll pending from manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment.

The Huawei SUN2000-12KTL-M2 12kW 3phase inverter has a maximum efficiency up to 98.6 with an adaptable and flexible triple MPPT. DC & AC lightning protection is integrated into the unit and the natural cooling effectively improves product reliability.

Smart

• Maximum of 2 MPPT for versatile adaption to different module types or quantities built up with different alignments
• Up to 4 strings intelligent monitoring and fault detection
• Exceptionally wide MPPT range.
• RS 485 and USB ports for connectivity and data management
• Local graphic LCD and optional remote monitoring via the NetEco portal or app.

Efficient

• Maximum efficiency 98.5%
• European efficiency 98%
• <1W consumption during the night

Safe

• DC and AC surge protection devices integrated
• Noise ≤ 29dB, Class-B electromagnetic radiation
• RCD protection function

Reliable

• Product warranty of 10 years
• Natural cooling technology with heat sink
• Outdoor application of IP65

 

Supplier Part No: 01074319-005

Weight: 25 kg

Rated Power: 12,000 W

Min PPT Voltage: 140 V

Max PPT Voltage: 950 V

DC Startup Voltage: 200 V

DC Shutdown Voltage: 140 V

Max Input Voltage: 1,080 V

Max DC Power: 18,000 W

Max AC Power (5 Minutes): 12,000 W

Surge AC Power (1 Second): 13,200 W

Max DC Current: 44 A

Max DC Inputs: 4

Has DC Fuses: 0

Connector: Amphenol H4  

Included Connectors: 4

Euro Efficiency: 98 %

Transformer: None

MPPT Quantity : 2

Has Integrated DC Switch: Yes

Warranty: 5 years

The Huawei SUN2000-15KTL-M2 15kW 3phase inverter has a maximum efficiency up to 98.6 with an adaptable and flexible triple MPPT. DC & AC lightning protection is integrated into the unit and the natural cooling effectively improves product reliability.

Smart

• Maximum of 2 MPPT for versatile adaption to different module types or quantities built up with different alignments
• Up to 4 strings intelligent monitoring and fault detection
• Exceptionally wide MPPT range.
• RS 485 and USB ports for connectivity and data management
• Local graphic LCD and optional remote monitoring via the NetEco portal or app.

Efficient

• Maximum efficiency 98.6%
• European efficiency 98.3%
• <1W consumption during the night

Safe

• DC and AC surge protection devices integrated
• Noise ≤ 29dB, Class-B electromagnetic radiation
• RCD protection function

Reliable

• Product warranty of 10 years
• Natural cooling technology with heat sink
• Outdoor application of IP65

 

Supplier Part No: 01074303-005

Weight: 25 kg

Rated Power: 15,000 W

Min PPT Voltage: 200 V

Max PPT Voltage: 950 V

DC Startup Voltage: 200 V

DC Shutdown Voltage: 160 V

Max Input Voltage: 1,080 V

Max DC Power: 22,500 W

Max AC Power (5 Minutes): 15,000 W

Surge AC Power (1 Second): 16,500 W

Max DC Current: 44 A

Max DC Inputs: 4

Has DC Fuses: 0

Connector: Amphenol H4  

Included Connectors: 4

Euro Efficiency: 98.65 %

Transformer: None

MPPT Quantity : 2

Has Integrated DC Switch: Yes

Warranty: 5 years

The Huawei SUN2000-17KTL-M2 17kW 3phase inverter has a maximum efficiency up to 98.6 with an adaptable and flexible triple MPPT. DC & AC lightning protection is integrated into the unit and the natural cooling effectively improves product reliability.

Smart

• Maximum of 2 MPPT for versatile adaption to different module types or quantities built up with different alignments
• Up to 4 strings intelligent monitoring and fault detection
• Exceptionally wide MPPT range.
• RS 485 and USB ports for connectivity and data management
• Local graphic LCD and optional remote monitoring via the NetEco portal or app.

Efficient

• Maximum efficiency 98.6%
• European efficiency 98.3%
• <1W consumption during the night

Safe

• DC and AC surge protection devices integrated
• Noise ≤ 29dB, Class-B electromagnetic radiation
• RCD protection function

Reliable

• Product warranty of 5 years, with the option to extend to up to 10. 
• Natural cooling technology with heat sink
• Outdoor application of IP65

 

Supplier Part No: 01074304-005

Weight: 25 kg

Rated Power: 17,000 W

Min PPT Voltage: 200 V

Max PPT Voltage: 950 V

DC Startup Voltage: 200 V

DC Shutdown Voltage: 160 V

Max Input Voltage: 1,080 V

Max DC Power: 25,500 W

Max AC Power (5 Minutes): 18,700 W

Surge AC Power (1 Second): 17,000 W

Max DC Current: 44 A

Max DC Inputs: 4

Has DC Fuses: 0

Connector: Amphenol H4  

Included Connectors: 4

Euro Efficiency: 98.3 %

Transformer: None

MPPT Quantity : 2

Has Integrated DC Switch: Yes

Warranty: 5 years

The Huawei SUN2000-20KTL-M2 20kW 3phase inverter has a maximum efficiency up to 98.6 with an adaptable and flexible triple MPPT. DC & AC lightning protection is integrated into the unit and the natural cooling effectively improves product reliability.

Smart

• Maximum of 2 MPPT for versatile adaption to different module types or quantities built up with different alignments
• Up to 4 strings intelligent monitoring and fault detection
• Exceptionally wide MPPT range.
• RS 485 and USB ports for connectivity and data management
• Local graphic LCD and optional remote monitoring via the NetEco portal or app.

Efficient

• Maximum efficiency 98.6%
• European efficiency 98.3%
• <1W consumption during the night

Safe

• DC and AC surge protection devices integrated
• Noise ≤ 29dB, Class-B electromagnetic radiation
• RCD protection function

Reliable

• Product warranty of 10 years
• Natural cooling technology with heat sink
• Outdoor application of IP65

 

Supplier Part No: 01074305-007

Weight: 25 kg

Rated Power: 20,000 W

Min PPT Voltage: 200 V

Max PPT Voltage: 950 V

DC Startup Voltage: 200 V

DC Shutdown Voltage: 160 V

Max Input Voltage: 1,080 V

Max DC Power: 30,000 W

Max AC Power (5 Minutes): 20,000 W

Surge AC Power (1 Second): 22,000 W

Max DC Current: 44 A

Max DC Inputs: 4

Has DC Fuses: 0

Connector: Amphenol H4  

Included Connectors: 4

Euro Efficiency: 98.3 %

Transformer: None

MPPT Quantity : 2

Has Integrated DC Switch: Yes

Warranty: 5 years

S5-GC50K - Series 5 Three Phase Grid-Tied Inverter

Product Features

• Max. efficiency of 98.7% 
• Type-II over-voltage surge protection for both DC and AC
• Wide voltage range - Ultra low start-up voltage of 195V and max PV input voltage of 1100V
• Max PV DC Power of 75kW
• 32A input per MPPT, 16A input for each PV string
• Maximum output power of 55kW
• 5 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch
• Intelligent monitoring, Smart I-V Curve Diagnosis
• Integrated AFCI (DC arc-fault circuit protection)
• IP66 Rated and C5 Anti-Corrosion Level
• Integrated DC switch for emergency shut-down of PV power or safe PV maintenance
• DC reverse-polarity protection
• Supports PLC/GPRS/WiFi communication with less wiring and reduced installation costs
• 5-year standard warranty

Register on SolisCloud, to support remote upgrade and control.

NRS-097-2-1 Certified

German and Dutch Installation Manuals still pending from the manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment.