Our products include sine wave inverters, sine wave inverter/chargers, battery chargers, solar charge controllers, Alternators, Batteries, DC/DC converters, battery monitors, and more.
Victron Energy has a strong, unrivalled reputation for technical innovation, reliability, and build quality. Our products are widely considered to be the professional choice for independent electric power.
Energy. Anytime. Anywhere.
Victron Products
679 products
Our products include sine wave inverters, sine wave inverter/chargers, battery chargers, solar charge controllers, Alternators, Batteries, DC/DC converters, battery monitors, and more.
Victron Energy has a strong, unrivalled reputation for technical innovation, reliability, and build quality. Our products are widely considered to be the professional choice for independent electric power.
Energy. Anytime. Anywhere.
Victron Energy Phoenix Inverter 48/2000 230V Smart – PIN482201000
Regular price£723.90 INC. VAT (£603.25 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA for 12, 24 or 48V systems.It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
 Features of the Phoenix 48/2000 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN482201000 |
gtin |
8719076057550 |
Voltage |
48V |
Cont. Output Power at 25°C |
2000VA |
Peak Power |
4000W |
Output AC Voltage |
230V |
Efficiency |
94% |
Protection Category |
IP21 |
Dimensions |
H485 x W219 x D125mm |
Weight |
13Kg |
Warranty |
5 Years |
Bluetooth Enabled |
Yes |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 48/1600 230V Smart – PIN482161000
Regular price£640.22 INC. VAT (£533.52 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA for 12, 24 or 48V systems.It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
 Features of the Phoenix 48/1600 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN482161000 |
GTIN |
8719076057543 |
Voltage |
48V |
Cont. Output Power at 25°C |
1600VA |
Peak Power |
3000W |
Output AC Voltage |
230V |
Efficiency |
94% |
Protection Category |
IP21 |
Dimensions |
H485 x W219 x D125mm |
Weight |
12Kg |
Warranty |
5 Years |
Bluetooth Enabled |
Yes |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 48/800 230V VE.Direct UK – PIN481801400
Regular price£248.14 INC. VAT (£206.78 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Â
The Phoenix 48/800 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the UK plug.
 Features of the Phoenix Inverter 48/800 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Monitoring:
- In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN481801400 |
gtin |
8719076056898 |
Voltage |
48V |
Cont. Output Power at 25ºC |
800VA |
Peak Power |
1500W |
Output AC Voltage |
230V |
Efficiency |
91% |
Protection Category |
IP21 |
Dimensions |
H105 x W216 x D305mm |
Weight |
5.5Kg |
Warranty |
5 Years |
Bluetooth Enabled |
No |
Plug Type |
UK |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 48/375 230V VE.Direct UK – PIN481371400
Regular price£115.44 INC. VAT (£96.20 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
The Phoenix 48/375 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the UK plug.
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USBÂ interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
 Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
 Monitoring:
- In- and output voltage, % load and alarms
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 48/375 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
Â
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
Â
ECO mode
When in ECO mode, the Phoenix Inverter 48/375 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Â
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Â
DC connection with screw terminals
No special tools needed for installation.
Â
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN481371400 |
GTIN |
8719076056812 |
Voltage |
48V |
Cont. Output Power at 25°C |
375VA |
Peak Power |
700W |
Output AC Voltage |
230V |
Efficiency |
90% |
Protection Category |
IP21 |
Dimensions |
H86 x W165 x D260mm |
Weight |
3Kg |
Warranty |
5 Years |
Bluetooth Enabled |
No |
Plug Type |
UK |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 24/5000 230V Smart – PIN242501000
Regular price£1,612.76 INC. VAT (£1,343.97 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA and 5000VA for 12, 24 or 48V systems.It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
 Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features of the Phoenix 24/5000 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN242501000 |
GTIN |
8719076058281 |
Voltage |
24V |
Cont. Output Power at 25°C |
5000VA |
Output AC Voltage |
230V |
Efficiency |
95% |
Protection Category |
IP21 |
Dimensions |
H595 x W295 x D160mm |
Weight |
29Kg |
Warranty |
5 Years |
Bluetooth Enabled |
Yes |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 24/2000 230V Smart – PIN242201000
Regular price£723.90 INC. VAT (£603.25 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Â
The Phoenix Inverter 24/2000 Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features of the Phoenix 24/2000 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
 VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
Â
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Â
Control over system
Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 24/1600 Smart, why not have a look at the CerboGX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN242201000 |
gtin |
8719076057536 |
Voltage |
24V |
Cont. Output Power at 25ºC |
2000VA |
Peak Power |
4000W |
Output AC Voltage |
230V |
Efficiency |
94% |
Protection Category |
IP21 |
Dimensions |
H485 x W219 x D125mm |
Weight |
13Kg |
Warranty |
5 Years |
Bluetooth Enabled |
Yes |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 24/1600 230V Smart – PIN242161000
Regular price£640.22 INC. VAT (£533.52 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Â
The Phoenix Inverter 24/1600 Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features of the Phoenix 24/1600 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
 VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Â
Control over system
Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 24/1600 Smart, why not have a look at the CerboGX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Â
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN242161000 |
gtin |
8719076057529 |
Voltage |
24V |
Cont. Output Power at 25°C |
1600VA |
Peak Power |
3000W |
Output AC Voltage |
230V |
Efficiency |
94% |
Protection Category |
IP21 |
Dimensions |
H485 x W219 x D125mm |
Weight |
12Kg |
Warranty |
5 Years |
Bluetooth Enabled |
Yes |
Country of Manufacture |
China |
Victron Energy Phoenix Inverter 24/500 230V VE.Direct UK – PIN241501400
Regular price£128.66 INC. VAT (£107.22 EXC. VAT)
Standard Delivery:
inc. VAT
The Phoenix 24/500 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the UK plug.
 Features of the Phoenix Inverter 24/500 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Â
Monitoring:
- In- and output voltage, % load and alarms
Â
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 24/500 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 ECO mode
When in ECO mode, the Phoenix Inverter 24/500 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Monitor, operate & control your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 24/500 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.
Â
The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.
Victron Energy Phoenix Inverter 24/375 230V VE.Direct UK – PIN241371400
Regular price£102.25 INC. VAT (£85.21 EXC. VAT)
Standard Delivery:
inc. VAT
The Phoenix 24/375 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the UK plug.
 Features of the Phoenix Inverter 24/375 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USBÂ interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
 Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Â
Monitoring:
- In- and output voltage, % load and alarms
Â
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 24/375 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 ECO mode
When in ECO mode, the Phoenix Inverter 24/375 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
 Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Â
DC connection with screw terminals
No special tools needed for installation.
Â
Monitor, operate & control your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 24/375 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.
Â
The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.
Victron Energy Phoenix Inverter 12/2000 230V Smart – PIN122201000
Regular price£723.90 INC. VAT (£603.25 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The Phoenix Inverter 12/2000 Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.Â
Â
Features of the Phoenix 12/2000 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
 VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Â
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
Â
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Â
Control over system
Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 12/1600 Smart, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Victron Energy Phoenix Inverter 12/1600 230V Smart – PIN122161000
Regular price£640.22 INC. VAT (£533.52 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Â
The Phoenix Inverter 12/1600 Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
 Features of the Phoenix 12/1600 Smart
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
 VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
 ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
 Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
 To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
 Control over system
Want to have perfect control over your system from wherever you are whilst using your Phoenix Inverter 12/1600 Smart, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Â
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN122161000 |
gtin |
8719076057505 |
Voltage |
12V |
Cont. Output Power at 25°C |
1600VA |
Peak Power |
3000W |
Output AC Voltage |
230V |
Efficiency |
92% |
Protection Category |
IP21 |
Dimensions |
H485 x W219 x D125mm |
Weight |
12Kg |
Warranty |
5 Years |
Bluetooth Enabled |
Yes |
Country of Manufacture |
China |
Peak Power |
3000W |
Victron Energy Phoenix Inverter 12/800 230V VE.Direct UK – PIN121801400
Regular price£231.65 INC. VAT (£193.04 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The Phoenix 12/800 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
This unit has the UK plug.
 Features of the Phoenix Inverter 12/800 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
 Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
 Monitoring:
- In- and output voltage, % load and alarms
 Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 12/800 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
 High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the Phoenix Inverter 12/800 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Â
DC connection with screw terminals
No special tools needed for installation.
Â
Monitor, operate & control your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 12/800 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.
Â
The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.
Â
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PIN121801400 |
gtin |
8719076055068 |
Voltage |
12V |
Cont. Output Power at 25°C |
800VA |
Peak Power |
1500W |
Output AC Voltage |
230V |
Efficiency |
90% |
Protection Category |
IP21 |
Dimensions |
H105 x W230 x D325mm |
Weight |
5.5Kg |
Warranty |
5 Years |
Bluetooth Enabled |
No |
Plug Type |
UK |
Country of Manufacture |
China |
Victron Energy Orion IP67 24/12V 5A (60W) – ORI241205260
Regular price£19.80 INC. VAT (£16.50 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.
Â
Extra-long input and output cables
Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.
Â
Wide input voltage range
With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.
Â
Protected against overheating
It can be used in a hot environment such as a machine room.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
ORI241205260 |
GTIN |
8719076048428 |
Voltage |
24/12V |
Cont. Output Current |
5A |
Protection Category |
IP67 |
Efficiency |
93% |
Bluetooth Enabled |
No |
Dimensions |
H25 x W43 x D20mm |
Weight |
0.05Kg |
Warranty |
5 Years |
Country of Manufacture |
China |
Victron Energy Orion 24/12-70A DC-DC Converter IP20 with Binding Posts – ORI241270030
Regular price£108.01 INC. VAT (£90.01 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Remote on-off connector
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).
Â
All models with adjustable output can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.
Â
All models with adjustable output can be paralleled to increase output current
Up to five units can be connected in parallel.
Â
Easy to install
Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).
Â
Low power models: please see Orion-Tr seriesÂ
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
ORI241270030 |
GTIN |
8719076023050 |
Voltage |
24/12V |
Cont. Output Current |
70A |
Protection Category |
IP20 |
Efficiency |
92% |
Bluetooth Enabled |
No |
Dimensions |
H65 x W88 x D195mm |
Weight |
0.9Kg |
Warranty |
5 Years |
Country of Manufacture |
India |
Victron Energy Orion 24/12-25A DC-DC Converter IP20 – ORI241225020
Regular price£59.39 INC. VAT (£49.49 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
Remote on-off connector
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).
All models with adjustable output can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.
All models with adjustable output can be paralleled to increase output current
Up to five units can be connected in parallel.
Easy to install
Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).
Low power models: please see Orion-Tr series
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
ORI241225020 |
GTIN |
8719076023012 |
Voltage |
24/12V |
Cont. Output Current |
25A |
Protection Category |
IP20 |
Efficiency |
96% |
Bluetooth Enabled |
No |
Dimensions |
H65 x W88 x D160mm |
Weight |
0.7Kg |
Warranty |
5 Years |
Victron Energy Orion-Tr 24/12V 15A (180W) DC-DC Converter – ORI241215200R
Regular price£43.44 INC. VAT (£36.20 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
High efficiency
Using synchronous rectification, full load efficiency exceeds 95%.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
ORI241215200R |
GTIN |
8719076022930 |
Voltage |
24/12V |
Cont. Output Current |
15A |
Protection Category |
IP43 |
Efficiency |
97% |
Bluetooth Enabled |
No |
Dimensions |
H73 x W94 x D45mm |
Weight |
0.25Kg |
Warranty |
5 Years |
Country of Manufacture |
India |
Victron Energy Orion-Tr 24/12V 10A (120W) DC-DC Converter – ORI241210200R
Regular price£28.87 INC. VAT (£24.06 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
High efficiency
Using synchronous rectification, full load efficiency exceeds 95%.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
ORI241210200R |
GTIN |
8719076022893 |
Voltage |
24/12V |
Cont. Output Current |
10A |
Protection Category |
IP43 |
Efficiency |
97% |
Bluetooth Enabled |
No |
Dimensions |
H73 x W94 x D37mm |
Weight |
0.2Kg |
Warranty |
5 Years |
Country of Manufacture |
India |
Victron Energy Skylla-i Control GX (Right Angle RJ45) – REC000300010R
Regular price£119.12 INC. VAT (£99.27 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The Skylla-i Control allows you to alter the charge current and see the system status.
Victron Energy Solar Panel 24V 330W Poly series 4b – SPP043302402
Regular price£167.40 INC. VAT (£139.50 EXC. VAT)
Standard Delivery: £47.99
inc. VAT
High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us.
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year limited warranty on materials and workmanship.
- Sealed, waterproof, multi-functional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
SPP043302402 |
GTIN |
8719076058083 |
Voltage |
24V |
Nominal Power |
330W |
Cell Type |
Polycrystalline |
Number of Cells in Series |
72 |
Maximum System Voltage |
1000V |
Dimensions |
L1980 x W1002 x D40mm |
Weight |
23Kg |
Warranty |
5 Years |
Victron Energy Solar Panel 20V 270W Poly series 4c – SPP042702003
Regular price£192.42 INC. VAT (£160.35 EXC. VAT)
Standard Delivery: £47.99
inc. VAT
High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us.
-
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year limited warranty on materials and workmanship.
- Sealed, waterproof, multi-functional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
- Â CLICK HERE FOR SPEC SHEETS
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
SPP042702003 |
GTIN |
8719076058076 |
Voltage |
20V |
Nominal Power |
270W |
Cell Type |
Polycrystalline |
Number of Cells in Series |
60 |
Maximum System Voltage |
1000V |
Dimensions |
L1640 x W992 x D35mm |
Weight |
18.4Kg |
Warranty |
5 Years |
Victron Energy Solar Panel 20V 270W Poly series 4b – SPP042702002
Regular price£192.42 INC. VAT (£160.35 EXC. VAT)
Standard Delivery: £47.99
inc. VAT
High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us.
-
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year limited warranty on materials and workmanship.
- Sealed, waterproof, multi-functional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
- Â CLICK HERE FOR SPEC SHEETS
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
SPP042702002 |
GTIN |
8719076057802 |
Voltage |
20V |
Nominal Power |
270W |
Cell Type |
Polycrystalline |
Number of Cells in Series |
60 |
Maximum System Voltage |
1000V |
Dimensions |
L1640 x W992 x D35mm |
Weight |
18.4Kg |
Warranty |
5 Years |
Victron Energy Solar Panel 20V 305W Mono series 4c – SPM043052003
Regular price£234.10 INC. VAT (£195.08 EXC. VAT)
Standard Delivery: £47.99
inc. VAT
High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us.
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year Limited warranty on materials and workmanship.
- Sealed, waterproof, multifunctional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- Pre wired quick-connect system with PV-ST01 connectors.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
SPM043052003 |
GTIN |
8719076058052 |
Voltage |
20V |
Nominal Power |
305W |
Cell Type |
Monocrystalline |
Number of Cells in Series |
72 |
Maximum System Voltage |
1000V |
Dimensions |
L1650 x W992 x D35mm |
Weight |
18.4Kg |
Warranty |
5 Years |
Victron Energy LiFePO4 Battery 25,6V/200Ah Smart-a – BAT524120610
Regular price£2,492.46 INC. VAT (£2,077.05 EXC. VAT)
Standard Delivery: £12.99
inc. VAT
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Features -
Rugged
A lead-acid battery will fail prematurely due to sulfation:Â
Â
- If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
- If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).
LFP is therefore the chemistry of choice for demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.
The round-trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
BMS
Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
BAT524120610 |
Voltage |
25.6 |
Capacity (C20) |
200 |
Terminal Type |
M8 |
Terminal Layout |
LH+ |
Dimensions (Including Terminals) |
H237 x W650 x D163mm |
Weight (kg) |
39 |
Warranty |
3 Years |
Battery Technology |
Lithium |
Victron Energy LiFePO4 Battery 25,6V/100Ah Smart – BAT524110610
Regular price£1,611.55 INC. VAT (£1,342.96 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Features -
Rugged
A lead-acid battery will fail prematurely due to sulfation:Â
Â
- If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
- If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).
LFP is therefore the chemistry of choice for demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.
The round-trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
BMS
Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
BAT524050705 |
Voltage |
25.6 |
Capacity (C20) |
100 |
Terminal Type |
M8 |
Terminal Layout |
LH+ |
Dimensions (Including Terminals) |
H197 x W650 x D163mm |
Weight (kg) |
28 |
Warranty |
3 Years |
Battery Technology |
Lithium |
Victron Energy Gel Deep Cycle Battery 12V 66Ah – BAT412600104
Regular price£179.84 INC. VAT (£149.87 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
All Batteries are Made By Leading Manufacturers
The GEL model range offers best deep cycle durability and overall longer life. The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particularly low self-discharge so that they will not go flat during long periods without charge. Both ranges are supplied with M8 drilled, flat copper terminals ensuring best possible connection contact and eliminating the need for battery terminals. The batteries are compliant with both CE and UL specifications in ABS fireproof containers and come with Victron’s 2 year world-wide warranty.
VRLA GEL: design life 12 years
Â
Features
VRLA technology
VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure.
VRLA batteries are maintenance free for life.
Â
Sealed (VRLA)Â GEL Batteries
Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life and better cycle capacity than AGM batteries.
Â
Low Self-Discharge
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.
Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.
Â
Exceptional Deep Discharge Recovery
Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.
Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.
Â
Battery Discharging Characteristics
The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
BAT412600104 |
GTIN |
8719076037163 |
Voltage |
12V |
Battery Capacity (C20) |
66Ah |
Cold Cranking |
270CCA |
Terminal Type |
M8 |
Terminal Layout |
Left Hand Positive |
Dimensions (Including Terminals) |
L258 x W166 x H235mm |
Weight |
24Kg |
Warranty |
2 Years |
Country of Manufacture |
Vietnam |
Battery Technology |
Gel |
Battery Application |
Dual Purpose |
Â
Victron Energy MultiPlus 48V 3000VA 35A 16A VE.Bus – PMP483020001
Regular price£1,067.86 INC. VAT (£889.88 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
Â
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Â
Features
Two AC Outputs
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PMP483020001 |
GTIN |
8719076024040 |
Voltage |
48V |
Cont. Output Power at 25°C |
3000VA |
Peak Power |
6000W |
Output AC Voltage |
230V |
Transfer Switch |
16A |
Charge Current House Battery |
35A |
Protection Category |
IP21 |
Efficiency |
95% |
Bluetooth Compatible |
No |
Dimensions |
H362 x W258 x D218mm |
Weight |
18Kg |
Warranty |
5 Years |
Victron Energy MultiPlus 24V 2000VA 50A 32A VE.Bus – PMP242200000
Regular price£983.56 INC. VAT (£819.63 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Â
Features
Two AC Outputs
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
Â
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.
Â
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
Â
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Â
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
Â
System configuring
In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
PMP242200000 |
GTIN |
8719076052173 |
Voltage |
24V |
Cont. Output Power at 25°C |
2000VA |
Peak Power |
3500W |
Output AC Voltage |
230V |
Transfer Switch |
35A |
Charge Current House Battery |
50A |
Charge Current Starter Battery |
1A |
Protection Category |
IP21 |
Efficiency |
94% |
Bluetooth Compatible |
No |
Dimensions |
H500 x W225 x D135mm |
Weight |
13.5Kg |
Warranty |
5 Years |
Â
Victron Energy Blue Smart IP67 Charger 24V 5A 1 Output – BPC240513006
Regular price£103.85 INC. VAT (£86.54 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Storage Mode: Less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
BPC240513006 |
GTIN |
8719076035947 |
Voltage |
24V |
Charge Current |
5A |
Input Voltage |
230V |
Number of Outputs |
1 |
Can Be Used As Power Supply |
Yes |
Protection Category |
IP67 |
Efficiency |
94% |
Bluetooth Enabled |
Yes |
Plug Type |
CEE 7/7 |
Dimensions |
H85 x W211 x D60mm |
Weight |
1.8Kg |
Warranty |
5 Years |
Victron Energy 6V/240Ah AGM Deep Cycle Battery (BAT406225084)
Regular price£255.72 INC. VAT (£213.10 EXC. VAT)
Standard Delivery: £12.99
inc. VAT
All Batteries are Made By Leading Manufacturers
The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.Â
VRLA AGM: design life 7-10 years
Â
Features
VRLA technology
VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure.
VRLA batteries are maintenance free for life.
Sealed (VRLA) AGM Batteries
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries.
Low Self-Discharge
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.
Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.
Exceptional Deep Discharge Recovery
Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.
Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.
Battery Discharging Characteristics
The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.
Brand |
Victron Energy |
---|---|
Manufacturer Part Number |
BAT406225084 |
GTIN |
8719076036951 |
Voltage |
6V |
Battery Capacity (C20) |
240Ah |
Cold Cranking |
700CCA |
Terminal Type |
M8 |
Terminal Layout |
Left Hand Positive |
Dimensions (Including Terminals) |
L320 x W176 x H247mm |
Weight |
31Kg |
Warranty |
2 Years |
Country of Manufacture |
Vietnam |
Battery Technology |
AGM |
Battery Application |
Dual Purpose |
Â
Victron Energy 12V/66Ah Gel Deep Cycle Battery (BAT412600084)
Regular price£215.29 INC. VAT (£179.41 EXC. VAT)
Standard Delivery: £8.99
inc. VAT
All Batteries are Made By Leading Manufacturers
The GEL model range offers best deep cycle durability and overall longer life. The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particularly low self-discharge so that they will not go flat during long periods without charge. Both ranges are supplied with M8 drilled, flat copper terminals ensuring best possible connection contact and eliminating the need for battery terminals. The batteries are compliant with both CE and UL specifications in ABS fireproof containers and come with Victron's 2 year world-wide warranty.
Brand | Victron Energy |
Voltage | 12 Volts |
Technology | Gel |
Capacity | 66 Ah |
Length | 258 mm |
Width | 166 mm |
Height inc. terms | 235 mm |
Weight |
24 KG |
Â
Victron Energy 12V/38Ah AGM Deep Cycle Battery (BAT412350084)
Regular price£108.85 INC. VAT (£90.71 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
All Batteries are Made By Leading Manufacturers
The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.Â
VRLA AGM: design life 7-10 years
Â
Features
VRLA technology
VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure.
VRLA batteries are maintenance free for life.
Sealed (VRLA) AGM Batteries
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries.
Low Self-Discharge
Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.
Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.
Exceptional Deep Discharge Recovery
Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.
Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.
Battery Discharging Characteristics
The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.
Brand | Victron Energy |
Voltage | 12 Volts |
Technology | AGM |
Capacity | 38 Ah |
Length | 197 mm |
Width | 165 mm |
Height inc. terms | 170 mm |
Weight |
12.5 KG |
Â
Welcome to Powerland Battery Centre! If you have any questions or require expert advise please feel free to contact us either via Phone, Email or our 24/7 Online chat.