Filter
Products
2630 products
2630 products
Victron Energy Battery switch ON/OFF 275A – VBS127010010
Regular price£28.88 INC. VAT (£24.07 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
 Victron Marine grade battery isolator switch. Suitable for battery systems up to 48VDC. 275A continuous rating
Â
CLICK HERE FOR SPEC SHEET
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
VBS127010010 |
| GTIN |
8719076052258 |
| Max. Continuous Current |
275A |
| One Minute Rating |
455A |
| Cranking Rating |
1250A |
| Voltage Rating |
48V |
| Terminal Material |
Tin-plated copper |
| Hex Nut Material |
Tin-plated copper |
| Terminal Diameter |
3/8 inch / 9.53mm |
| Recommended Torque |
70 lbf·inch / 8 N·m |
| Base Material |
Glass fiber reinforced nylon |
| Mounting |
Surface or rear panel mount |
| Dimensions |
H69 x W69 x D73mm |
| Weight |
0.2Kg |
| Warranty |
5 Years |
| Country of Manufacture |
Taiwan |
Victron Energy Blue Smart IP22 Charger 12/15(1) 230V UK – BPC121542022
Regular price£110.57 INC. VAT (£92.14 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
 The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC121542022 |
| Voltage |
12 |
| Charger Amps |
15 |
| Efficiency |
93% |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 12/15(3) 230V UK – BPC121544022
Regular price£127.07 INC. VAT (£105.89 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
 The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC121544022 |
| Voltage |
12 |
| Charger Amps |
15 |
| Efficiency |
93% |
| Outputs |
3 |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 12/20(1) 230V UK – BPC122042022
Regular price£136.48 INC. VAT (£113.73 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
 The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC122042022 |
| Voltage |
12 |
| Charger Amps |
20 |
| Efficiency |
93% |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 12/20(3) 230V UK – BPC122043022
Regular price£148.44 INC. VAT (£123.70 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC122043022 |
| Voltage |
12 |
| Charger Amps |
20 |
| Efficiency |
93% |
| Outputs |
3 |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 12/30(1) 230V UK – BPC123047022
Regular price£158.35 INC. VAT (£131.96 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC123047022 |
| Voltage |
12 |
| Charger Amps |
30A |
| Outputs |
1 |
| Efficiency |
93% |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 12/30(3) 230V UK – BPC123048022
Regular price£178.13 INC. VAT (£148.44 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC123048022 |
| GTIN |
8719076052425 |
| Voltage |
12 |
| Charger Amps |
30A |
| Outputs |
3 |
| Efficiency |
93% |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 24/12(1) 230V UK – BPC241242022
Regular price£135.25 INC. VAT (£112.71 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC241242022 |
| Voltage |
24 |
| Charger Amps |
12 |
| Efficiency |
94% |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight (kg) |
1.3 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 24/16(1) 230V UK – BPC241647022
Regular price£161.64 INC. VAT (£134.70 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC241647022 |
| GTIN |
8719076052494 |
| Voltage | |
| Charger Amps |
16A |
| Outputs |
1 |
| Efficiency |
94% |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP22 Charger 24/16(3) 230V UK – BPC241648022
Regular price£183.01 INC. VAT (£152.51 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC241648022 |
| GTIN |
8719076052531 |
| Voltage |
24 |
| Charger Amps |
16A |
| Outputs |
3 |
| Efficiency |
94% |
| Plug Type |
UK |
| IP Rating |
IP22 |
| Dimensions |
H235 x W108 x D65mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 12/10(1) 230V UK – BPC121031024R
Regular price£108.01 INC. VAT (£90.01 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Victron Chargers
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits:
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC121031024R |
| Voltage (V) |
12 |
| Charger Amps |
10 |
| Efficiency |
945 |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP65 |
| Dimensions |
H60 x W105 x D190mm |
| Weight (kg) |
0.9 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 12/15(1) 230V UK – BPC121531024R
Regular price£124.50 INC. VAT (£103.75 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Victron Chargers
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits:
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC121531024R |
| Voltage (V) |
12 |
| Charger Amps |
15 |
| Efficiency |
94% |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP65 |
| Dimensions |
H60 x W105 x D190mm |
| Weight (kg) |
0.9 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 12/4(1) 230V UK – BPC120433024R
Regular price£62.68 INC. VAT (£52.23 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Victron Chargers
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits:
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC120431024R |
| Voltage (V) |
12 |
| Charger Amps |
4 |
| Efficiency |
94% |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP65 |
| Dimensions |
H45 x W81 x D182mm |
| Weight (kg) |
0.9 |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 12V 25A 1 Output UK – BPC122531024
Regular price£165.67 INC. VAT (£138.06 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Â
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Â
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC122531024 |
| GTIN |
8719076051565 |
| Voltage |
12V |
| Charge Current |
25A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Protection Category |
IP65 (splash and dust proof) |
| Efficiency |
94% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H75 x W140 x D240mm |
| Weight |
1.9Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 12V 7A 1 Output UK – BPC120731024R
Regular price£71.93 INC. VAT (£59.94 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Â
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Â
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC120731024R |
| GTIN |
8719076039747 |
| Voltage |
12V |
| Charge Current |
7A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Protection Category |
IP65 (splash and dust proof) |
| Efficiency |
94% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H47 x W95 x D190mm |
| Weight |
0.9Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 24V 13A 1 Output UK – BPC241331024
Regular price£165.67 INC. VAT (£138.06 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Â
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Â
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC241331024 |
| GTIN |
8719076051589 |
| Voltage |
24V |
| Charge Current |
13A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Protection Category |
IP65 (splash and dust proof) |
| Efficiency |
95% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H75 x W140 x D240mm |
| Weight |
1.9Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 24V 8A 1 Output UK – BPC240831024R
Regular price£124.50 INC. VAT (£103.75 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Â
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Â
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC240831024R |
| GTIN |
8719076040699 |
| Voltage |
24V |
| Charge Current |
8A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Protection Category |
IP65 (splash and dust proof) |
| Efficiency |
95% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H60 x W105 x D190mm |
| Weight |
0.9Kg |
| Warranty |
5 Years |
Victron Energy Blue Smart IP65 Charger 6V/12V-1.1 – BPC120134024R
Regular price£43.69 INC. VAT (£36.41 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP65 Charger 6V/12V-1.1 is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65s Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Â
Features of the Blue Smart IP65 Charger 6V/12V-1.1
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Â
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger 6V/12V-1.1will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Â
Reconditioning
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.
Â
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC120134024R |
| gtin |
8719076055532 |
| Voltage |
6/12V |
| Charge Current |
1.1A |
| Input Voltage |
230V |
| Protection Category |
IP65 |
| Efficiency |
82% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H38 x W64 x D153mm |
| Weight |
0.4Kg |
| Warranty |
5 Years |
| Country of Manufacture |
India |
Victron Energy Blue Smart IP65s Charger 12/5(1) 230V UK – BPC120533024R
Regular price£70.13 INC. VAT (£58.44 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Victron Chargers
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
 Benefits:
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Â
Features
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC120431024R |
| Voltage (V) |
12 |
| Charger Amps |
5 |
| Efficiency |
94% |
| Outputs |
1 |
| Plug Type |
UK |
| IP Rating |
IP65 |
| Dimensions |
H45 x W81 x D182mm |
| Weight (kg) |
0.9 |
| Warranty |
5 Years |
Â
Victron Energy Blue Smart IP67 Charger 12/13 (1) 12V 13A 1 Output UK – BPC121347026
Regular price£102.25 INC. VAT (£85.21 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
Â
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Â
Features
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Â
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.
Â
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Â
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Â
Storage Mode: Less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Â
Also charges Li-ion batteries
Li-ion batteries are charged with a simple bulk – absorption – float algorithm.
Â
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.
Â
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Â
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on.
Â
| GTIN | 8719076055273 |
| Voltage | 12V |
| Charge Current | 13A |
| Input Voltage | 230V |
| Number of Outputs | 1 |
| Efficiency | 93% |
| Bluetooth Enabled | Yes |
| Plug Type | UK |
| Protection Category | IP67 |
| Dimensions | H85 x W211 x D60mm |
| Weight | 1.8Kg |
| Warranty | 5 Years |
| Country of Manufacture | India |
Victron Energy Blue Smart IP67 Charger 12/7(1) – BPC120747026
Regular price£77.52 INC. VAT (£64.60 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
 Features of the Blue Smart IP67 Charger 12/7(1)
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP67 Charger Waterproof will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely
Blue Smart IP67 Charger Waterproof is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat.
And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Â
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Blue Smart IP67 Charger 12/7(1) features a microprocessor controlled ‘adaptive’ battery management.
Â
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC120747026 |
| gtin |
8719076055259 |
| Voltage |
12V |
| Charge Current |
7A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Protection Category |
IP67 |
| Efficiency |
93% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H85 x W211 x D60mm |
| Weight |
1.8Kg |
| Warranty |
5 Years |
| Country of Manufacture |
India |
Victron Energy Blue Smart IP67 Charger 24V 12A 1 Output UK – BPC241247026
Regular price£146.86 INC. VAT (£122.38 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Storage Mode: Less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion batteries
Li-ion batteries are charged with a simple bulk – absorption – float algorithm.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC241247026 |
| GTIN |
8719076055372 |
| Voltage |
24V |
| Charge Current |
12A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Protection Category |
IP67 |
| Efficiency |
96% |
| Bluetooth Enabled |
Yes |
| Plug Type |
UK |
| Dimensions |
H99 x W219 x D65mm |
| Weight |
2.4Kg |
| Warranty |
5 Years |
| Country of Manufacture |
India |
Victron Energy Blue Smart IP67 Charger 24V 5A 1 Output – BPC240513006
Regular price£103.85 INC. VAT (£86.54 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Storage Mode: Less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
BPC240513006 |
| GTIN |
8719076035947 |
| Voltage |
24V |
| Charge Current |
5A |
| Input Voltage |
230V |
| Number of Outputs |
1 |
| Can Be Used As Power Supply |
Yes |
| Protection Category |
IP67 |
| Efficiency |
94% |
| Bluetooth Enabled |
Yes |
| Plug Type |
CEE 7/7 |
| Dimensions |
H85 x W211 x D60mm |
| Weight |
1.8Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 100/15 – SCC010015200R
Regular price£80.04 INC. VAT (£66.70 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programming, real-time data and history display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC010015200R |
| GTIN |
8719076025337 |
| Battery Voltage |
12/24V Auto Select |
| Rated Charge Current |
15A |
| Nominal PV Power, 12V |
220W |
| Nominal PV Power, 24V |
440W |
| Max. PV Short Circuit Current |
15A |
| Maximum PV Open Circuit Voltage |
100V |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H100 x W113 x D40mm |
| Weight |
0.5Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 100/20-48V – SCC110020170R
Regular price£94.82 INC. VAT (£79.02 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programming, real-time data and history display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC110020170R |
| GTIN |
8719076049845 |
| Battery Voltage |
12/24/48V |
| Rated Charge Current |
20A |
| Nominal PV Power, 12V |
290W |
| Nominal PV Power, 24V |
580W |
| Nominal PV Power, 48V |
1160W |
| Max. PV Short Circuit Current |
20A |
| Maximum PV Open Circuit Voltage |
100V |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H100 x W113 x D60mm |
| Weight |
0.65Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 100/30 – SCC020030200
Regular price£146.00 INC. VAT (£121.67 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
- ColorControl GX or other GX devices
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC020030200 |
| GTIN |
8719076025542 |
| Battery Voltage |
12/24V Auto Select |
| Rated Charge Current |
30A |
| Nominal PV Power, 12V |
440W |
| Nominal PV Power, 24V |
880W |
| Max. PV Short Circuit Current |
35A |
| Maximum PV Open Circuit Voltage |
100V |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H130 x W186 x D70mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 100/50 – SCC020050200
Regular price£218.46 INC. VAT (£182.05 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
- ColorControl GX or other GX devices
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC020050200 |
| GTIN |
8719076025566 |
| Battery Voltage |
12/24V Auto Select |
| Rated Charge Current |
50A |
| Nominal PV Power, 12V |
700W |
| Nominal PV Power, 24V |
1400W |
| Max. PV Short Circuit Current |
60A |
| Maximum PV Open Circuit Voltage |
100V |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H130 x W186 x D70mm |
| Weight |
1.3Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 150/100-Tr VE.Can – SCC115110420
Regular price£664.67 INC. VAT (£553.89 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 99%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed)
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC115110420 |
| GTIN |
8719076049852 |
| Battery Voltage |
12 / 24 / 48V Auto Select (software tool needed to select 36V) |
| Rated Charge Current |
100A |
| Nominal PV Power, 12V |
1450W |
| Nominal PV Power, 24V |
4350W |
| Max. PV Short Circuit Current |
70A |
| Maximum PV Open Circuit Voltage |
150V absolute maximum coldest conditions | 145V start-up and operating maximum |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Can |
| Protection Category |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H216 x W295 x D103mm |
| Weight |
3Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 150/35 – SCC020035000
Regular price£218.58 INC. VAT (£182.15 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC020035000 |
| GTIN |
8719076025559 |
| Battery Voltage |
12 / 24 / 48V Auto Select (software tool needed to select 36V) |
| Rated Charge Current |
35A |
| Nominal PV Power, 12V |
500W |
| Nominal PV Power, 24V |
1000W |
| Max. PV Short Circuit Current |
40A |
| Maximum PV Open Circuit Voltage |
150V absolute maximum coldest conditions 145V start-up and operating maximum |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H130 x W186 x D70mm |
| Weight |
1.25Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 150/45 – SCC115045222
Regular price£262.33 INC. VAT (£218.61 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC115045222 |
| GTIN |
8719076053033 |
| Battery Voltage |
12/24/48V Auto Select (software tool needed to select 36V) |
| Rated Charge Current |
45A |
| Nominal PV power |
12V: 650W / 24V: 1300W / 36V: 1950W / 48V: 2600W |
| Max. PV short circuit current |
50A |
| Maximum PV Open Circuit Voltage |
150V absolute maximum coldest conditions 145V start-up and operating maximum |
| Maximum efficiency |
98% |
| Charge Algorithm |
multi-stage adaptive (eight pre-programmed algorithms) |
| Data Communication Port |
VE.Direct |
| Protection Category |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H130 x W186 x D70mm |
| Weight |
1.25Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 150/45-MC4 – SCC010045300
Regular price£372.66 INC. VAT (£310.55 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed)
Real-time data display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC010045300 |
| GTIN |
8719076025443 |
| Battery Voltage |
12/24/48V Auto Select (software tool needed to select 36V) |
| Rated Charge Current |
45A |
| Nominal PV Power, 12V |
650W |
| Nominal PV Power, 24V |
1300W |
| Max. PV Short Circuit Current |
50A |
| Maximum PV Open Circuit Voltage |
150V absolute maximum coldest conditions 145V start-up and operating maximum |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H215 x W250 x D95mm |
| Weight |
3Kg |
| Warranty |
5 Years |
Victron Energy BlueSolar MPPT 150/45-Tr – SCC010045200
Regular price£371.68 INC. VAT (£309.73 EXC. VAT)
Standard Delivery: £7.99
inc. VAT
/
Shipping calculated at checkout.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Â
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed)
Real-time data display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Brand |
Victron Energy |
|---|---|
| Manufacturer Part Number |
SCC010045200 |
| GTIN |
8719076025436 |
| Battery Voltage |
12/24/48V Auto Select (software tool needed to select 36V) |
| Rated Charge Current |
45A |
| Nominal PV Power, 12V |
650W |
| Nominal PV Power, 24V |
1300W |
| Max. PV Short Circuit Current |
50A |
| Maximum PV Open Circuit Voltage |
150V absolute maximum coldest conditions 145V start-up and operating maximum |
| Efficiency |
98% |
| Charge Algorithm |
Multi-stage adaptive |
| Data Communication Port |
VE.Direct |
| IP Rating |
IP43 (electronic components), IP22 (connection area) |
| Dimensions |
H185 x W250 x D95mm |
| Weight |
3Kg |
| Warranty |
5 Years |
Welcome to Powerland Battery Centre! If you have any questions or require expert advise please feel free to contact us either via Phone, Email or our 24/7 Online chat.